Our multi-channel signal conditioning modules provide separate A/D conversion on each channel and up to 24-bit resolution with anti-aliasing filters. Perfect simultaneous sampling for all analog input modules. You are absolutely flexible with the user-exchangeable TRION3 & TRION modules – just insert them in your suitable DEWETRON DAQ system.
There are two module series: The highspeed TRION3 modules are only compatible with the DEWE3 chassis. But TRION modules can be used in both, DEWE3 and DEWE2 chassis.
SELECT COUNT(*) AS `count` FROM `dewe_cakeisalie`.`productlines` AS `Productline` WHERE `Productline`.`id` = 'trion-3-modules'
1
1
0
SELECT `Productline`.`name`, `Productline`.`sort`, `Productline`.`description`, `Productline`.`id`, `Productline`.`slug`, `Productline`.`active` FROM `dewe_cakeisalie`.`productlines` AS `Productline` WHERE `Productline`.`active` = '1' AND (`Productline`.`permissions` & 1 != 0) AND `Productline`.`slug` = 'trion-3-modules' LIMIT 1
1
1
0
SELECT `Productgroup`.`slug`, `Productgroup`.`name`, `Productgroup`.`id`, `Productgroup`.`description`, `Productgroup`.`productline_id` FROM `dewe_cakeisalie`.`productgroups` AS `Productgroup` WHERE `Productgroup`.`active` = '1' AND (`Productgroup`.`permissions` & 1 != 0) AND `Productgroup`.`productline_id` = ('63775d30-f528-4d84-8adc-4ddad9c49a3c') ORDER BY `Productgroup`.`sort` ASC, `Productgroup`.`name` ASC
0
0
0
SELECT `Productfamily`.`name`, `Productfamily`.`slug`, `ProductfamiliesProductline`.`productline_id`, `ProductfamiliesProductline`.`productfamily_id`, `ProductfamiliesProductline`.`id` FROM `dewe_cakeisalie`.`productfamilies` AS `Productfamily` JOIN `dewe_cakeisalie`.`productfamilies_productlines` AS `ProductfamiliesProductline` ON (`ProductfamiliesProductline`.`productline_id` = '63775d30-f528-4d84-8adc-4ddad9c49a3c' AND `ProductfamiliesProductline`.`productfamily_id` = `Productfamily`.`id`) WHERE `Productfamily`.`active` = '1' AND (`Productfamily`.`permissions` & 1 != 0)
1
1
0
SELECT `Download`.`filename`, `Download`.`sort`, `Download`.`releasedate`, `Download`.`name`, `Download`.`id`, `Download`.`active`, `Download`.`filesize`, `Download`.`version`, `Download`.`oscompat`, `Download`.`downloadtype`, `Download`.`advancedOnly`, `Download`.`internalOnly`, `Download`.`language`, `Download`.`description`, `Download`.`md5`, `Download`.`sha1`, `Download`.`download_count`, `DownloadsProductline`.`id`, `DownloadsProductline`.`download_id`, `DownloadsProductline`.`productline_id` FROM `dewe_cakeisalie`.`downloads` AS `Download` JOIN `dewe_cakeisalie`.`downloads_productlines` AS `DownloadsProductline` ON (`DownloadsProductline`.`productline_id` = '63775d30-f528-4d84-8adc-4ddad9c49a3c' AND `DownloadsProductline`.`download_id` = `Download`.`id`) WHERE `Download`.`active` = '1' AND (`Download`.`permissions` & 1 != 0) ORDER BY `Download`.`sort` ASC, `Download`.`downloadtype` ASC, `Download`.`name` ASC
70
70
3
Query Explain:
Click an "Explain" link above, to see the query explanation.
description<p style="text-align:center"><img alt="" height="249" src="https://www.dewetron.com/app/uploads/2024/07/TRION-modular-data-acquisition-modules.png" width="600" /></p>
<p>Our multi-channel signal conditioning modules provide separate A/D conversion on each channel and up to 24-bit resolution with anti-aliasing filters. Perfect simultaneous sampling for all analog input modules. You are absolutely flexible with the user-exchangeable TRION3 & TRION modules – just insert them in your suitable <a href="https://www.dewetron.com/products/data-acquisition-hardware-chassis/">DEWETRON DAQ system</a>.</p>
<p>There are two module series: The highspeed <strong>TRION3 </strong> modules are only compatible with the <a href="https://www.dewetron.com/products/data-acquisition-hardware-chassis/">DEWE3 chassis</a>. But <strong>TRION</strong> modules can be used in both, <a href="https://www.dewetron.com/products/data-acquisition-hardware-chassis/">DEWE3 and DEWE2 chassis</a>.</p>
description<p><code><strong>## 2026-07-31 Release Notice DEWETRON TRION API R8.2.0</strong></code></p>
<p><code>Revision: 7337aeee5b6d30313a108c1e8af8752ac003b684 </code></p>
<p> </p>
<p><code>Components | Version</code></p>
<p><code>--------------------------------|--------------------------</code></p>
<p><code>DEWETRON Explorer | 8.2.0.10435</code></p>
<p><code>DEWETRON TRION API | 8.2.0.10435</code></p>
<p><code>DEWETRON TRION driver | 8.2.0.10435</code></p>
<p><code>DEWETRON DEWE2 driver | 8.2.0.10435</code></p>
<p> </p>
<p><code><strong>## Files</strong></code></p>
<p><code>DEWETRON-TRION-Applications-8.2.0.10435.exe</code></p>
<p> </p>
<p><code><strong>## Requirements</strong></code></p>
<p><code>* Update all TRION modules to the latest firmware included in this release</code></p>
<p><code>* Use OXYGEN R8.1.0 or higher</code></p>
<p><code>* Windows 10 64-Bit or better</code></p>
<p> </p>
<p><code><strong>## Installation procedure</strong></code></p>
<p><code>* Install TRION applications</code></p>
<p><code>* Reboot system (if requested by the installer)</code></p>
<p><code>* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)</code></p>
<p><code>* Power-cycle TRION boards (Power down system, then restart)</code></p>
<p><code>* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p> </p>
<p><code><strong>## Fixes and Changes</strong></code></p>
<p><code>* TRION-2402-dACC: Fix counter treshold and retrigger inconsistencies.</code></p>
<p><code>* TRION3-CANFD: Fixed an issue when CAN messages are delayed.</code></p>
<p><code>* TRION3-24XX-ACC: Fixed FIR-filter data latch bug and ADC read data timings.</code></p>
<p> </p>
<p><code><strong>## New Firmwares</strong></code></p>
<p><code>HW Support TRION3 modules | Firmware</code></p>
<p><code>--------------------------------|-----------</code></p>
<p><code>TRION3-2402-ACC-6-BNC | FW: 0027</code></p>
<p><code>TRION3-2402-LV-6-BNC | FW: 0027</code></p>
<p><code>TRION3-2420-ACC-6-BNC | FW: 0027</code></p>
<p><code>TRION3-2420-LV-6-BNC | FW: 0027</code></p>
description<p><code>## 2024-03-08 Release Notice DEWETRON TRION API R7.0.1</code></p>
<p><code>Revision: b1c725da774ed2596fc9e59c111e53bd3f5cf5a1</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.0.1.3193<br />
DEWETRON TRION API | 7.0.1.3193<br />
DEWETRON TRION driver | 7.0.1.3193<br />
DEWETRON DEWE2 driver | 7.0.1.3193</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-7.0.1.3193.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.0.0 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working</code></p>
description<p><code>## 2024-03-08 Release Notice DEWETRON TRION API R7.0.1</code></p>
<p><code>Revision: b1c725da774ed2596fc9e59c111e53bd3f5cf5a1</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.0.1.3193<br />
DEWETRON TRION API | 7.0.1.3193<br />
DEWETRON TRION driver | 7.0.1.3193<br />
DEWETRON DEWE2 driver | 7.0.1.3193</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-7.0.1.3193.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.0.0 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working</code></p>
<p> </p>
description<p><code><tt>## 2024-05-27 Release Notice DEWETRON TRION API R7.1.1</tt></code></p>
<p><code><tt>Revision: 26c98ba4677bc1a19d7e0590475122b6c54e05d3</tt></code></p>
<p><code><tt>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.1.1.4060<br />
DEWETRON TRION API | 7.1.1.4060<br />
DEWETRON TRION driver | 7.1.1.4060<br />
DEWETRON DEWE2 driver | 7.1.1.4060</tt></code></p>
<p><code><tt>## Files<br />
DEWETRON-TRION-Applications-7.1.1.4060.exe</tt></code></p>
<p><code><tt>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.1.1 or higher<br />
* Windows 10 64-Bit or better</tt></code></p>
<p><code><tt>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</tt></code></p>
<p><code><tt>## Fixes<br />
* TRION3-1820-ACC-8-MD fixed firmware showing correct channel status in voltage mode</tt></code></p>
<p><code><tt>## Known Limitations<br />
* NEX[DAQ]-1000 simulation does not support sample rate divider</tt></code></p>
<p><code><tt>## New Firmwares</tt></code></p>
<p><code><tt>HW Support TRION3 modules | Firmware<br />
--------------------------------|-----------<br />
TRION3-1820-ACC-8-MD | FW: 0050</tt></code></p>
description<p><code>## 2024-05-27 Release Notice DEWETRON TRION API R7.1.1</code></p>
<p><code>Revision: 26c98ba4677bc1a19d7e0590475122b6c54e05d3</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.1.1.4060<br />
DEWETRON TRION API | 7.1.1.4060<br />
DEWETRON TRION driver | 7.1.1.4060<br />
DEWETRON DEWE2 driver | 7.1.1.4060</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-7.1.1.4060.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.1.1 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## Fixes<br />
* TRION3-1820-ACC-8-MD fixed firmware showing correct channel status in voltage mode</code></p>
<p><code>## Known Limitations<br />
* NEX[DAQ]-1000 simulation does not support sample rate divider</code></p>
<p><code>## New Firmwares</code></p>
<p><code>HW Support TRION3 modules | Firmware<br />
--------------------------------|-----------<br />
TRION3-1820-ACC-8-MD | FW: 0050</code></p>
description<p><tt>## 2024-08-27 Release Notice DEWETRON TRION API R7.2.1</tt></p>
<p><tt>Revision: 876a648bcaebd47fe225e89ab132256fce382190</tt></p>
<p><tt>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.2.1.5243<br />
DEWETRON TRION API | 7.2.1.5243<br />
DEWETRON TRION driver | 7.2.1.5243<br />
DEWETRON DEWE2 driver | 7.2.1.5243</tt></p>
<p><tt>## Files<br />
DEWETRON-TRION-Applications-7.2.1.5243.exe</tt></p>
<p><tt>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.2.0 or higher<br />
* Windows 10 64-Bit or better</tt></p>
<p><tt>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</tt></p>
<p><tt>## Fixes<br />
* NEX[DAQ]-1000 simulation sample rate divider support fixed.</tt></p>
description<p><tt>## 2024-08-27 Release Notice DEWETRON TRION API R7.2.1</tt></p>
<p><tt>Revision: 876a648bcaebd47fe225e89ab132256fce382190</tt></p>
<p><tt>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.2.1.5243<br />
DEWETRON TRION API | 7.2.1.5243<br />
DEWETRON TRION driver | 7.2.1.5243<br />
DEWETRON DEWE2 driver | 7.2.1.5243</tt></p>
<p><tt>## Files<br />
DEWETRON-TRION-Applications-7.2.1.5243.exe</tt></p>
<p><tt>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.2.0 or higher<br />
* Windows 10 64-Bit or better</tt></p>
<p><tt>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</tt></p>
<p><tt>## Fixes<br />
* NEX[DAQ]-1000 simulation sample rate divider support fixed.</tt></p>
description<p><tt>## 2024-11-20 Release Notice DEWETRON TRION API R7.3.2<br />
Revision: f6f8bf5b1b38b78b8d8a67761130412adeb7e977<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.3.2.6198<br />
DEWETRON TRION API | 7.3.2.6198<br />
DEWETRON TRION driver | 7.3.2.6198<br />
DEWETRON DEWE2 driver | 7.3.2.6198<br />
## Files<br />
DEWETRON-TRION-Applications-7.3.2.6198.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.3.2 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes<br />
* Fix for semaphore handling of date and time changes.</tt></p>
description<p><tt>## 2025-03-05 Release Notice DEWETRON TRION API R7.4.2<br />
Revision: 38d9842531ceafe409e38f55812f2da2aa53be1a<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.4.2.7598<br />
DEWETRON TRION API | 7.4.2.7598<br />
DEWETRON TRION driver | 7.4.2.7598<br />
DEWETRON DEWE2 driver | 7.4.2.7598<br />
## Files<br />
DEWETRON-TRION-Applications-7.4.2.7598.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.4.2 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes and Changes<br />
* TRIONet API returned an invalid number of samples when using i64 getter function<br />
* Removed prototype boards listed in DEWETRON Explorer</tt><br />
<br />
</p>
description<p><br />
<code>## 2025-05-21 Release Notice DEWETRON TRION API R7.5.1<br />
Revision: 3e3ed878907a6072cb10a8af2bf58122a90fab4b<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.5.1.8543<br />
DEWETRON TRION API | 7.5.1.8543<br />
DEWETRON TRION driver | 7.5.1.8543<br />
DEWETRON DEWE2 driver | 7.5.1.8543<br />
## Files<br />
DEWETRON-TRION-Applications-7.5.1.8543.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.5.1 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes and Changes<br />
* Fixed an justage error with TRION-2402-dACC board (internal)</code></p>
description<p><code>## 2025-08-19 Release Notice DEWETRON TRION API R7.6.1<br />
Revision: b4dfecd169bf9d2127e9b90217df4b0d26d77439<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.6.1.7502<br />
DEWETRON TRION API | 7.6.1.7502<br />
DEWETRON TRION driver | 7.6.1.7502<br />
DEWETRON DEWE2 driver | 7.6.1.7502<br />
## Files<br />
DEWETRON-TRION-Applications-7.6.1.7502.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.6.1 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes and Changes<br />
* TRION3-CONTROLLER: Fix for applying BCD time load value to register<br />
* TRION3-CONTROLLER: Fix for auto setup with chassis controller (PTP)<br />
* TRION3-CONTROLLER: Fix for analog input artefacts if dewe2 sync is connected<br />
* LITEPA-CONTROLLER: Fix for applying BCD time load value to register<br />
<tt>* LITEPA-CONTROLLER: Fix for analog input artefacts if dewe2 sync is connected</tt></code><br />
<tt>## Known Limitations (Errata)<br />
ID012 - TRION-SUB-XV sometimes measure wrong data or show no samples at all (OXYGEN and TRION 7.6.1)<br />
ID013 - OXYGEN-NET: Slave system does not start acquisition (OXYGEN and TRION 7.6.1)</tt><br />
</p>
description<p><code>## 2025-11-07 Release Notice DEWETRON TRION API R7.7.0</code></p>
<p><code>Revision: e2be43084954fb49f92e44007ee6e4ec56616c19 </code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.7.0.8215<br />
DEWETRON TRION API | 7.7.0.8215<br />
DEWETRON TRION driver | 7.7.0.8215<br />
DEWETRON DEWE2 driver | 7.7.0.8215</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-7.7.0.8215.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.7.0 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## Fixes and Changes<br />
* Dewetron Explorer - Remote Network Settings window does not load actual settings<br />
* TRION3-CONTROLLER: Fix for IRIG sync frequency jump<br />
* TRION3-CONTROLLER: Fix for Frequency Out doesn't work<br />
* TRION3-CONTROLLER: Fix for PTP-Master cold start - invalid sync signal<br />
* TRION3-POWER: Wrong measurement on SUB-XV @3MS<br />
* TRION3-POWER: Fix for spikes on Channels<br />
* TRION-1620-LV/ACC: Fix for DCDC Control fails<br />
* TRION3-POWER & TRION-SUB-CT: Fix for Offset Jumps between several restarts.<br />
* TRION-SUB-XV: Fix for wrong measurement scaling</code></p>
description<p><code><strong>## 2026-07-31 Release Notice DEWETRON TRION API R8.2.0</strong></code></p>
<p><code>Revision: 7337aeee5b6d30313a108c1e8af8752ac003b684 </code></p>
<p> </p>
<p><code>Components | Version</code></p>
<p><code>--------------------------------|--------------------------</code></p>
<p><code>DEWETRON Explorer | 8.2.0.10435</code></p>
<p><code>DEWETRON TRION API | 8.2.0.10435</code></p>
<p><code>DEWETRON TRION driver | 8.2.0.10435</code></p>
<p><code>DEWETRON DEWE2 driver | 8.2.0.10435</code></p>
<p> </p>
<p><code><strong>## Files</strong></code></p>
<p><code>DEWETRON-TRION-Applications-8.2.0.10435.exe</code></p>
<p> </p>
<p><code><strong>## Requirements</strong></code></p>
<p><code>* Update all TRION modules to the latest firmware included in this release</code></p>
<p><code>* Use OXYGEN R8.1.0 or higher</code></p>
<p><code>* Windows 10 64-Bit or better</code></p>
<p> </p>
<p><code><strong>## Installation procedure</strong></code></p>
<p><code>* Install TRION applications</code></p>
<p><code>* Reboot system (if requested by the installer)</code></p>
<p><code>* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)</code></p>
<p><code>* Power-cycle TRION boards (Power down system, then restart)</code></p>
<p><code>* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p> </p>
<p><code><strong>## Fixes and Changes</strong></code></p>
<p><code>* TRION-2402-dACC: Fix counter treshold and retrigger inconsistencies.</code></p>
<p><code>* TRION3-CANFD: Fixed an issue when CAN messages are delayed.</code></p>
<p><code>* TRION3-24XX-ACC: Fixed FIR-filter data latch bug and ADC read data timings.</code></p>
<p> </p>
<p><code><strong>## New Firmwares</strong></code></p>
<p><code>HW Support TRION3 modules | Firmware</code></p>
<p><code>--------------------------------|-----------</code></p>
<p><code>TRION3-2402-ACC-6-BNC | FW: 0027</code></p>
<p><code>TRION3-2402-LV-6-BNC | FW: 0027</code></p>
<p><code>TRION3-2420-ACC-6-BNC | FW: 0027</code></p>
<p><code>TRION3-2420-LV-6-BNC | FW: 0027</code></p>
<p> </p>
name(Has Critical Issue, see Notes) DEWETRON TRION R6.7.1 Setup.exe
id653673ca-9660-494b-b368-4827d9c49a3c
active(true)
filesize203856032
versionR6.7.1
oscompatWindows
downloadtypeInstaller (archive)
advancedOnly(false)
internalOnly(false)
language
description<p><code><strong>Known Issue:<br />
TRION(3)-18xx-MULTI: high-pass filter not working except 150 mHz (0,15 Hz)<br />
Please use 150 mHz for correct function</strong></code></p>
<p><br />
<code>## 2023-10-23 Release Notice DEWETRON TRION API R6.7.1</code></p>
<p><code>Revision: 1ee33ea7162d4418af9de534a019b5426b815472</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.1.1582<br />
DEWETRON TRION API | 6.7.1.1582<br />
DEWETRON TRION driver | 6.7.1.1582<br />
DEWETRON DEWE2 driver | 6.7.1.1582</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.7.1.1582.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.1 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* TRION driver fix for last 32bit addressable page (Debian Linux OS)</code></p>
<p><code>## Known Limitations<br />
* None</code></p>
name(Has Critical Issue, see Notes) DEWETRON TRION R6.7.1 Zip
id653673ca-330c-4886-a90d-451fd9c49a3c
active(true)
filesize203646853
versionR6.7.1
oscompatWindows
downloadtypeInstaller (archive)
advancedOnly(false)
internalOnly(false)
language
description<p><strong>Known Issue:<br />
TRION(3)-18xx-MULTI: high-pass filter not working except 150 mHz (0,15 Hz)<br />
Please use 150 mHz for correct function</strong></p>
<p> </p>
<p><code>## 2023-10-23 Release Notice DEWETRON TRION API R6.7.1</code></p>
<p><code>Revision: 1ee33ea7162d4418af9de534a019b5426b815472</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.1.1582<br />
DEWETRON TRION API | 6.7.1.1582<br />
DEWETRON TRION driver | 6.7.1.1582<br />
DEWETRON DEWE2 driver | 6.7.1.1582</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.7.1.1582.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.1 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* TRION driver fix for last 32bit addressable page (Debian Linux OS)</code></p>
<p><code>## Known Limitations<br />
* None</code></p>
description<p><tt>## 2023-12-04 Release Notice DEWETRON TRION API R6.7.2</tt></p>
<p><tt>Revision: 6e29cade2bda4c122e6674a6263aeb6b6bb16c2c</tt></p>
<p><tt>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.2.2175<br />
DEWETRON TRION API | 6.7.2.2175<br />
DEWETRON TRION driver | 6.7.2.2175<br />
DEWETRON DEWE2 driver | 6.7.2.2175</tt></p>
<p><tt>## Files<br />
DEWETRON-TRION-Applications-6.7.2.2175.exe</tt></p>
<p><tt>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.1 or higher<br />
* Windows 10 64-Bit or better</tt></p>
<p><tt>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</tt></p>
<p><tt>## New Features and most important bugfixes<br />
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal<br />
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML<br />
* CHASSIS-CONTROLLER-V2: Fixed an issue with spikes when using CAN OUT (new fw)</tt></p>
<p><tt>## Known Limitations<br />
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected</tt></p>
<p><tt>## New Firmwares</tt></p>
<p><tt>HW Support DEWE3 chassis | Firmware<br />
--------------------------------|-----------<br />
DEWE3-A4 | FW: x0038 MCU: 0x01000109<br />
DEWE3-M4 | FW: x0038 MCU: 0x01000109</tt></p>
<p> </p>
description<p><tt>## 2024-11-20 Release Notice DEWETRON TRION API R7.3.2<br />
Revision: f6f8bf5b1b38b78b8d8a67761130412adeb7e977<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.3.2.6198<br />
DEWETRON TRION API | 7.3.2.6198<br />
DEWETRON TRION driver | 7.3.2.6198<br />
DEWETRON DEWE2 driver | 7.3.2.6198<br />
## Files<br />
DEWETRON-TRION-Applications-7.3.2.6198.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.3.2 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes<br />
* Fix for semaphore handling of date and time changes.</tt><br />
</p>
description<p><tt>## 2025-03-05 Release Notice DEWETRON TRION API R7.4.2<br />
Revision: 38d9842531ceafe409e38f55812f2da2aa53be1a<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.4.2.7598<br />
DEWETRON TRION API | 7.4.2.7598<br />
DEWETRON TRION driver | 7.4.2.7598<br />
DEWETRON DEWE2 driver | 7.4.2.7598<br />
## Files<br />
DEWETRON-TRION-Applications-7.4.2.7598.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.4.2 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes and Changes<br />
* TRIONet API returned an invalid number of samples when using i64 getter function<br />
* Removed prototype boards listed in DEWETRON Explorer</tt><br />
<br />
</p>
description<p><code>## 2026-02-19 Release Notice DEWETRON TRION API R8.0.0<br />
Revision: 5b377c100c887e7f4e18b1736b9f4c679e8f1d57<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 8.0.0.9068<br />
DEWETRON TRION API | 8.0.0.9068<br />
DEWETRON TRION driver | 8.0.0.9068<br />
DEWETRON DEWE2 driver | 8.0.0.9068<br />
## Files<br />
DEWETRON-TRION-Applications-8.0.0.9068.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R8.0.0 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes and Changes<br />
* TRION3-CONTROLLER: Added support for gPTP (IEEE 802.1AS)<br />
* TRION3-24XX-ACC, TRION3-24XX-LV support added<br />
* NEXDAQ: Fixed an issue, where CAN-FD-Frames would only correctly transmit the first 8 bytes of a message<br />
* NEXDAQ-1000: CNT1 to CNT4 can now be used with 1MS, avoiding artifacts in frequency-measurement due to sample-reduction<br />
<br />
## New Firmwares<br />
HW Support TRION3 modules | Firmware<br />
--------------------------------|-----------<br />
TRION3-2402-ACC-6-BNC | FW: 0021<br />
TRION3-2420-ACC-6-BNC | FW: 0021<br />
TRION3-2402-LV-6-BNC | FW: 0021<br />
TRION3-2420-LV-6-BNC | FW: 0021<br />
TRION3-CONTROLLER | FW: 0052 MCU: 01000161<br />
<br />
HW Support Chassis modules | Firmware<br />
--------------------------------|-----------<br />
TRION3-CONTROLLER | FW: 0052 MCU: 01000161</code></p>
description<p><br />
<code>## 2025-05-21 Release Notice DEWETRON TRION API R7.5.1<br />
Revision: 3e3ed878907a6072cb10a8af2bf58122a90fab4b<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.5.1.8543<br />
DEWETRON TRION API | 7.5.1.8543<br />
DEWETRON TRION driver | 7.5.1.8543<br />
DEWETRON DEWE2 driver | 7.5.1.8543<br />
## Files<br />
DEWETRON-TRION-Applications-7.5.1.8543.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.5.1 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes and Changes<br />
* Fixed an justage error with TRION-2402-dACC board (internal)</code></p>
description<p><code>## 2025-08-19 Release Notice DEWETRON TRION API R7.6.1<br />
Revision: b4dfecd169bf9d2127e9b90217df4b0d26d77439<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.6.1.7502<br />
DEWETRON TRION API | 7.6.1.7502<br />
DEWETRON TRION driver | 7.6.1.7502<br />
DEWETRON DEWE2 driver | 7.6.1.7502<br />
## Files<br />
DEWETRON-TRION-Applications-7.6.1.7502.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.6.1 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes and Changes<br />
* TRION3-CONTROLLER: Fix for applying BCD time load value to register<br />
* TRION3-CONTROLLER: Fix for auto setup with chassis controller (PTP)<br />
* TRION3-CONTROLLER: Fix for analog input artefacts if dewe2 sync is connected<br />
* LITEPA-CONTROLLER: Fix for applying BCD time load value to register<br />
<tt>* LITEPA-CONTROLLER: Fix for analog input artefacts if dewe2 sync is connected</tt></code><br />
<tt>## Known Limitations (Errata)<br />
ID012 - TRION-SUB-XV sometimes measure wrong data or show no samples at all (OXYGEN and TRION 7.6.1)<br />
ID013 - OXYGEN-NET: Slave system does not start acquisition (OXYGEN and TRION 7.6.1)</tt><br />
</p>
description<p><code>## 2025-11-07 Release Notice DEWETRON TRION API R7.7.0</code></p>
<p><code>Revision: e2be43084954fb49f92e44007ee6e4ec56616c19 </code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.7.0.8215<br />
DEWETRON TRION API | 7.7.0.8215<br />
DEWETRON TRION driver | 7.7.0.8215<br />
DEWETRON DEWE2 driver | 7.7.0.8215</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-7.7.0.8215.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.7.0 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## Fixes and Changes<br />
* Dewetron Explorer - Remote Network Settings window does not load actual settings<br />
* TRION3-CONTROLLER: Fix for IRIG sync frequency jump<br />
* TRION3-CONTROLLER: Fix for Frequency Out doesn't work<br />
* TRION3-CONTROLLER: Fix for PTP-Master cold start - invalid sync signal<br />
* TRION3-POWER: Wrong measurement on SUB-XV @3MS<br />
* TRION3-POWER: Fix for spikes on Channels<br />
* TRION-1620-LV/ACC: Fix for DCDC Control fails<br />
* TRION3-POWER & TRION-SUB-CT: Fix for Offset Jumps between several restarts.<br />
* TRION-SUB-XV: Fix for wrong measurement scaling</code></p>
description<p><br />
<code>## 2026-02-19 Release Notice DEWETRON TRION API R8.0.0<br />
Revision: 5b377c100c887e7f4e18b1736b9f4c679e8f1d57<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 8.0.0.9068<br />
DEWETRON TRION API | 8.0.0.9068<br />
DEWETRON TRION driver | 8.0.0.9068<br />
DEWETRON DEWE2 driver | 8.0.0.9068<br />
## Files<br />
DEWETRON-TRION-Applications-8.0.0.9068.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R8.0.0 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes and Changes<br />
* TRION3-CONTROLLER: Added support for gPTP (IEEE 802.1AS)<br />
* TRION3-24XX-ACC, TRION3-24XX-LV support added<br />
* NEXDAQ: Fixed an issue, where CAN-FD-Frames would only correctly transmit the first 8 bytes of a message<br />
* NEXDAQ-1000: CNT1 to CNT4 can now be used with 1MS, avoiding artifacts in frequency-measurement due to sample-reduction<br />
<br />
## New Firmwares<br />
HW Support TRION3 modules | Firmware<br />
--------------------------------|-----------<br />
TRION3-2402-ACC-6-BNC | FW: 0021<br />
TRION3-2420-ACC-6-BNC | FW: 0021<br />
TRION3-2402-LV-6-BNC | FW: 0021<br />
TRION3-2420-LV-6-BNC | FW: 0021<br />
TRION3-CONTROLLER | FW: 0052 MCU: 01000161<br />
<br />
HW Support Chassis modules | Firmware<br />
--------------------------------|-----------<br />
TRION3-CONTROLLER | FW: 0052 MCU: 01000161</code><br />
</p>
description<p><tt>## 2023-12-04 Release Notice DEWETRON TRION API R6.7.2</tt></p>
<p><tt>Revision: 6e29cade2bda4c122e6674a6263aeb6b6bb16c2c</tt></p>
<p><tt>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.2.2175<br />
DEWETRON TRION API | 6.7.2.2175<br />
DEWETRON TRION driver | 6.7.2.2175<br />
DEWETRON DEWE2 driver | 6.7.2.2175</tt></p>
<p><tt>## Files<br />
DEWETRON-TRION-Applications-6.7.2.2175.exe</tt></p>
<p><tt>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.1 or higher<br />
* Windows 10 64-Bit or better</tt></p>
<p><tt>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</tt></p>
<p><tt>## New Features and most important bugfixes<br />
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal<br />
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML<br />
* CHASSIS-CONTROLLER-V2: Fixed an issue with spikes when using CAN OUT (new fw)</tt></p>
<p><tt>## Known Limitations<br />
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected</tt></p>
<p><tt>## New Firmwares</tt></p>
<p><tt>HW Support DEWE3 chassis | Firmware<br />
--------------------------------|-----------<br />
DEWE3-A4 | FW: x0038 MCU: 0x01000109<br />
DEWE3-M4 | FW: x0038 MCU: 0x01000109</tt></p>
<p> </p>
description<p><code>## 2024-03-08 Release Notice DEWETRON TRION API R6.7.4</code></p>
<p><code>Revision: 5bfa00ce7c0d900ebe46b42d7ee420c3e28c8f2d</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.4.3192<br />
DEWETRON TRION API | 6.7.4.3192<br />
DEWETRON TRION driver | 6.7.4.3192<br />
DEWETRON DEWE2 driver | 6.7.4.3192</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.7.4.3192.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.3 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working</code></p>
<p> </p>
description<p><code>## 2024-03-08 Release Notice DEWETRON TRION API R6.7.4</code></p>
<p><code>Revision: 5bfa00ce7c0d900ebe46b42d7ee420c3e28c8f2d</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.4.3192<br />
DEWETRON TRION API | 6.7.4.3192<br />
DEWETRON TRION driver | 6.7.4.3192<br />
DEWETRON DEWE2 driver | 6.7.4.3192</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.7.4.3192.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.3 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working</code></p>
<p> </p>