It is time for something new. Something simple and pure. It is time for PU[REC]. Discover the data recorder for the next generation. Our PU[REC] is portable, expandable, easy to use with touch operation and delivers the well-known and widely appreciated DEWETRON quality. Enjoy your measurement task and the analysis of your data with the included measurement software OXYGEN – during the recording as well as afterwards. Enjoy your PU[REC].
belongs to: Products & Drivers
You have to be logged in to access the downloads. Please use the login form on the top of the page.
## 2025-03-05 Release Notice DEWETRON TRION API R7.4.2
Revision: 38d9842531ceafe409e38f55812f2da2aa53be1a
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.4.2.7598
DEWETRON TRION API | 7.4.2.7598
DEWETRON TRION driver | 7.4.2.7598
DEWETRON DEWE2 driver | 7.4.2.7598
## Files
DEWETRON-TRION-Applications-7.4.2.7598.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.4.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* TRIONet API returned an invalid number of samples when using i64 getter function
* Removed prototype boards listed in DEWETRON Explorer
## 2025-03-05 Release Notice DEWETRON TRION API R7.4.2
Revision: 38d9842531ceafe409e38f55812f2da2aa53be1a
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.4.2.7598
DEWETRON TRION API | 7.4.2.7598
DEWETRON TRION driver | 7.4.2.7598
DEWETRON DEWE2 driver | 7.4.2.7598
## Files
DEWETRON-TRION-Applications-7.4.2.7598.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.4.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* TRIONet API returned an invalid number of samples when using i64 getter function
* Removed prototype boards listed in DEWETRON Explorer
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working
DEWETRON Issues and Errata
(IssuesAndErrata.pdf - 209 KB) md5: a0549a8bda8d2266a2c69f1e7d4aed77
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.6 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION(3)-1820-MULTI:
* Input coupling (highpass filter) overshoot fixed with 0.15Hz filter
* TRIONet3 support
* TRION(3)-Power:
* TRION SUB-XV support
* TRION3-SUB-8:
* TRION SUB-XV support
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.0.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Dewetron Explorer
* New X icon, better dark mode, splashscreen
* Improved network configuration
* Added set to default (default static, default dhcp)
* Allow configuration even if ip seetings do not match (TRIONet, NEXDAQ)
* CAN-FD bittiming added
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.0.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Dewetron Explorer
* New X icon, better dark mode, splashscreen
* Improved network configuration
* Added set to default (default static, default dhcp)
* Allow configuration even if ip seetings do not match (TRIONet, NEXDAQ)
* CAN-FD bittiming added
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.0.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.0.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.1.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* TRION3-1820-ACC-8-MD fixed firmware showing correct channel status in voltage mode
## Known Limitations
* NEX[DAQ]-1000 simulation does not support sample rate divider
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.1.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* TRION3-1820-ACC-8-MD fixed firmware showing correct channel status in voltage mode
## Known Limitations
* NEX[DAQ]-1000 simulation does not support sample rate divider
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.2.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* NEX[DAQ]-1000 simulation sample rate divider support fixed.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.2.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* NEX[DAQ]-1000 simulation sample rate divider support fixed.
## 2024-11-20 Release Notice DEWETRON TRION API R7.3.2
Revision: f6f8bf5b1b38b78b8d8a67761130412adeb7e977
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.3.2.6198
DEWETRON TRION API | 7.3.2.6198
DEWETRON TRION driver | 7.3.2.6198
DEWETRON DEWE2 driver | 7.3.2.6198
## Files
DEWETRON-TRION-Applications-7.3.2.6198.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.3.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* Fix for semaphore handling of date and time changes.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.4.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* New firmware for 18XX-MULTI fixing spikes in the signal when using CAN OUT
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION driver fix for last 32bit addressable page (Debian Linux OS)
## Known Limitations
* None
(Has Critical Issue, see Notes) DEWETRON TRION R6.7.1 Zip
(DEWETRON TRION R6.7.1.zip - 194.21 MB) md5: 62743ffddad6f659135616521e591b68
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION driver fix for last 32bit addressable page (Debian Linux OS)
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.4 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-AOUT-8 support added
- Monitor Mode
- Math Output Mode
- Const Output Mode
- Function Generator Mode
** MSI2_V_600 support added
** TRION-TIMING-V3
- Fixed off by 1 second sync issue (PTP)
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.4 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-AOUT-8 support added
- Monitor Mode
- Math Output Mode
- Const Output Mode
- Function Generator Mode
** MSI2_V_600 support added
** TRION-TIMING-V3
- Fixed off by 1 second sync issue (PTP)
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.5 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-1810-SUB-8 added
** TRION3-AOUT-8
- Added discret channel support
** Self Test:
- "Board RAM" test enabled for
- TRION3-1820-MULTI-4-D
- TRION3-1820-MULTI-8-L0B
- TRION3-1850-MULTI-4-D
- TRION3-1850-MULTI-8-L0B
- TRION3-1810M-POWER-4
- TRION3-1810-SUB-8
- TRION3-AOUT-8
- TRION-1600-dLV-16-D
- TRION-1600-dLV-16-D-CAN
- TRION-1600-dLV-32-D
- TRION-1600-dLV-32-D-CAN
- TRION-1802-dLV-16-D
- TRION-1802-dLV-16-D-CAN
- TRION-1802-dLV-32-D
- TRION-1802-dLV-32-D-CAN
- TRION-1820-MULTI-4-D
- TRION-1820-POWER-4
- TRION-1810M-POWER-4
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.5 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-1810-SUB-8 added
** TRION3-AOUT-8
- Added discret channel support
** Self Test:
- "Board RAM" test enabled for
- TRION3-1820-MULTI-4-D
- TRION3-1820-MULTI-8-L0B
- TRION3-1850-MULTI-4-D
- TRION3-1850-MULTI-8-L0B
- TRION3-1810M-POWER-4
- TRION3-1810-SUB-8
- TRION3-AOUT-8
- TRION-1600-dLV-16-D
- TRION-1600-dLV-16-D-CAN
- TRION-1600-dLV-32-D
- TRION-1600-dLV-32-D-CAN
- TRION-1802-dLV-16-D
- TRION-1802-dLV-16-D-CAN
- TRION-1802-dLV-32-D
- TRION-1802-dLV-32-D-CAN
- TRION-1820-MULTI-4-D
- TRION-1820-POWER-4
- TRION-1810M-POWER-4
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.5 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-AOUT-8
- "StreamOutput" Mode added allowing file replay feature
** New firmware fixing reboot issue
- TRION3-1820-MULTI
- TRION3-1820-MULTI-8-L0B
- TRION3-1850-MULTI-4-D
- TRION3-1850-MULTI-8-L0B
- TRION-1820-MULTI-4-D
** TRION-2402-V
- Added oversampling option
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.5 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-AOUT-8
- "StreamOutput" Mode added allowing file replay feature
** New firmware fixing reboot issue
- TRION3-1820-MULTI
- TRION3-1820-MULTI-8-L0B
- TRION3-1850-MULTI-4-D
- TRION3-1850-MULTI-8-L0B
- TRION-1820-MULTI-4-D
** TRION-2402-V
- Added oversampling option
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
- TRION-AO Digital-Out-channels are now labled "DO" in Oxygen channellist (Oxy + API)
- Dewetron Explorer: failed SRAM-Test during selftests now highlighted in red with correct text
- Increased reliablity when scanning for TEDS-devices on systems with high data-load
- TRION-CAN-channels default to "one-shot-mode". So messages that are not acknoledged by any listener will not be retried to be sent autonomously by the transceifer. This is done to decrease latency for CAN-Out and minimizing the risk of message-collisions on bus.
- Oversampling Configuration Item corrected
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
- TRION-AO Digital-Out-channels are now labled "DO" in Oxygen channellist (Oxy + API)
- Dewetron Explorer: failed SRAM-Test during selftests now highlighted in red with correct text
- Increased reliablity when scanning for TEDS-devices on systems with high data-load
- TRION-CAN-channels default to "one-shot-mode". So messages that are not acknoledged by any listener will not be retried to be sent autonomously by the transceifer. This is done to decrease latency for CAN-Out and minimizing the risk of message-collisions on bus.
- Oversampling Configuration Item corrected
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
- Added FPGA firmware protection
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
- Added FPGA firmware protection
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** Added support for TRION3-1820-POWER
** Fixed a bug when TRION-API stops applications from successfully terminating
* Known Limitations:
** None
* HW Support TRION modules:
** TRION3-1820-POWER-4 FW: x0064
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** Added support for TRION3-1820-POWER
** Fixed a bug when TRION-API stops applications from successfully terminating
* Known Limitations:
** None
* HW Support TRION modules:
** TRION3-1820-POWER-4 FW: x0064
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** Support for DEWE3 chassis controller
- Sync: PTP, GPS, IRIG, PPS
- 1xCAN
- 8xDI (or 2xCNT), 4xDO, AUX
** Fixed problems with CAN-traffic smaller 2 Hz
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** Support for DEWE3 chassis controller
- Sync: PTP, GPS, IRIG, PPS
- 1xCAN
- 8xDI (or 2xCNT), 4xDO, AUX
** Fixed problems with CAN-traffic smaller 2 Hz
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0.1 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION-VGPS-100-V3: Fixed acquisition start problem
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0.1 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION-VGPS-100-V3: Fixed acquisition start problem
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0.1 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION-TIMING-V3: Fixed issue detecting the board in a wrong slot
** CAN: Fixed issue when CAN-OUT leads to buffer overflows
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-18XX-MULTI, TRION-18XX-MULTI
- Added support for order 10 iir filter
** IRIG-OUT
- Implemented for TIMING-V3
** TRION3-1810-SUB, TRION3-18XX-Power, TRION-18XX-Power
- Support for SUB-XV added
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-18XX-MULTI, TRION-18XX-MULTI
- Added support for order 10 iir filter
** IRIG-OUT
- Implemented for TIMING-V3
** TRION3-1810-SUB, TRION3-18XX-Power, TRION-18XX-Power
- Support for SUB-XV added
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-18XX-MULTI, TRION-18XX-MULTI
- Fix for CAN delay issue with FW 0x0033
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-18XX-MULTI, TRION-18XX-MULTI
- Fix for CAN delay issue with FW 0x0033
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-18XX-POWER, TRION-18XX-POWER
- Fixed slot 3 issues
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-18XX-POWER, TRION-18XX-POWER
- Fixed slot 3 issues
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-18XX-POWER, TRION-18XX-POWER
- Fixed phase error with current delay settings on 1MS ADCs.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-18XX-POWER, TRION-18XX-POWER
- Fixed phase error with current delay settings on 1MS ADCs.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* New chassis: DEWE3-A4L
* TRION3-1820-MULTI, TRION3-1850-MULTI
- Current mode: 2mA range support added
* TRION-1820-MULTI
- Current mode: 2mA range support added
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.5 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-1802-dLV: Full support added
* TRION3-1600-dLV: Full support added
* Chassis Controller 2:
* Frequency-Out support
* IRIG Out support
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.6 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION(3)-1820-MULTI:
* Input coupling (highpass filter) overshoot fixed with 0.15Hz filter
* TRIONet3 support
* TRION(3)-Power:
* TRION SUB-XV support
* TRION3-SUB-8:
* TRION SUB-XV support
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.6.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* NEX[DAQ]-200 device support
* PTP Master functionality for DEWE3-OPT-IRIG/PTP
* TRION(3)-Power:
* TRION SUB-XV fixed
* TRION3-SUB-8:
* TRION SUB-XV fixed
* PUREC
* Fixed MSI detection issue
* CB16D
* Fixed MSI detection issue
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.6.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* NEX[DAQ]-200 device support
* PTP Master functionality for DEWE3-OPT-IRIG/PTP
* TRION(3)-Power:
* TRION SUB-XV fixed
* TRION3-SUB-8:
* TRION SUB-XV fixed
* PUREC
* Fixed MSI detection issue
* CB16D
* Fixed MSI detection issue
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML
* CHASSIS-CONTROLLER-V2: Fixed an issue with spikes when using CAN OUT (new fw)
## Known Limitations
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## 2024-11-20 Release Notice DEWETRON TRION API R7.3.2
Revision: f6f8bf5b1b38b78b8d8a67761130412adeb7e977
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.3.2.6198
DEWETRON TRION API | 7.3.2.6198
DEWETRON TRION driver | 7.3.2.6198
DEWETRON DEWE2 driver | 7.3.2.6198
## Files
DEWETRON-TRION-Applications-7.3.2.6198.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.3.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* Fix for semaphore handling of date and time changes.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.4.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* New firmware for 18XX-MULTI fixing spikes in the signal when using CAN OUT
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* New chassis: DEWE3-A4L
* TRION3-1820-MULTI, TRION3-1850-MULTI
- Current mode: 2mA range support added
* TRION-1820-MULTI
- Current mode: 2mA range support added
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.5 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-1802-dLV: Full support added
* TRION3-1600-dLV: Full support added
* Chassis Controller 2:
* Frequency-Out support
* IRIG Out support
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML
* CHASSIS-CONTROLLER-V2: Fixed an issue with spikes when using CAN OUT (new fw)
## Known Limitations
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0.1 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION-TIMING-V3: Fixed issue detecting the board in a wrong slot
** CAN: Fixed issue when CAN-OUT leads to buffer overflows
SELECT COUNT(*) AS `count` FROM `dewe_cakeisalie`.`productlines` AS `Productline` WHERE `Productline`.`id` = 'purec'
1
1
0
SELECT `Productline`.`name`, `Productline`.`sort`, `Productline`.`description`, `Productline`.`id`, `Productline`.`slug`, `Productline`.`active` FROM `dewe_cakeisalie`.`productlines` AS `Productline` WHERE `Productline`.`active` = '1' AND (`Productline`.`permissions` & 1 != 0) AND `Productline`.`slug` = 'purec' LIMIT 1
1
1
0
SELECT `Productgroup`.`slug`, `Productgroup`.`name`, `Productgroup`.`id`, `Productgroup`.`description`, `Productgroup`.`productline_id` FROM `dewe_cakeisalie`.`productgroups` AS `Productgroup` WHERE `Productgroup`.`active` = '1' AND (`Productgroup`.`permissions` & 1 != 0) AND `Productgroup`.`productline_id` = ('5faaaa98-02a8-441a-9c5c-2babd9c49a3c') ORDER BY `Productgroup`.`sort` ASC, `Productgroup`.`name` ASC
0
0
0
SELECT `Productfamily`.`name`, `Productfamily`.`slug`, `ProductfamiliesProductline`.`productline_id`, `ProductfamiliesProductline`.`productfamily_id`, `ProductfamiliesProductline`.`id` FROM `dewe_cakeisalie`.`productfamilies` AS `Productfamily` JOIN `dewe_cakeisalie`.`productfamilies_productlines` AS `ProductfamiliesProductline` ON (`ProductfamiliesProductline`.`productline_id` = '5faaaa98-02a8-441a-9c5c-2babd9c49a3c' AND `ProductfamiliesProductline`.`productfamily_id` = `Productfamily`.`id`) WHERE `Productfamily`.`active` = '1' AND (`Productfamily`.`permissions` & 1 != 0)
1
1
0
SELECT `Download`.`filename`, `Download`.`sort`, `Download`.`releasedate`, `Download`.`name`, `Download`.`id`, `Download`.`active`, `Download`.`filesize`, `Download`.`version`, `Download`.`oscompat`, `Download`.`downloadtype`, `Download`.`advancedOnly`, `Download`.`internalOnly`, `Download`.`language`, `Download`.`description`, `Download`.`md5`, `Download`.`sha1`, `DownloadsProductline`.`id`, `DownloadsProductline`.`download_id`, `DownloadsProductline`.`productline_id` FROM `dewe_cakeisalie`.`downloads` AS `Download` JOIN `dewe_cakeisalie`.`downloads_productlines` AS `DownloadsProductline` ON (`DownloadsProductline`.`productline_id` = '5faaaa98-02a8-441a-9c5c-2babd9c49a3c' AND `DownloadsProductline`.`download_id` = `Download`.`id`) WHERE `Download`.`active` = '1' AND (`Download`.`permissions` & 1 != 0) ORDER BY `Download`.`sort` ASC, `Download`.`downloadtype` ASC, `Download`.`name` ASC
68
68
1
Query Explain:
Click an "Explain" link above, to see the query explanation.
description<p style="text-align:center"><img alt="" height="340" src="/js/kcfinder/upload/images/PUREC-left-front_no-stand.jpg" width="400" /></p>
<h1>Pure<br />
Recording</h1>
<p>It is time for something new. Something simple and pure. It is time for PU[REC]. Discover the data recorder for the next generation. Our PU[REC] is portable, expandable, easy to use with touch operation and delivers the well-known and widely appreciated DEWETRON quality. Enjoy your measurement task and the analysis of your data with the included measurement software OXYGEN – during the recording as well as afterwards. Enjoy your PU[REC].</p>
description<p><tt>## 2025-03-05 Release Notice DEWETRON TRION API R7.4.2<br />
Revision: 38d9842531ceafe409e38f55812f2da2aa53be1a<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.4.2.7598<br />
DEWETRON TRION API | 7.4.2.7598<br />
DEWETRON TRION driver | 7.4.2.7598<br />
DEWETRON DEWE2 driver | 7.4.2.7598<br />
## Files<br />
DEWETRON-TRION-Applications-7.4.2.7598.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.4.2 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes and Changes<br />
* TRIONet API returned an invalid number of samples when using i64 getter function<br />
* Removed prototype boards listed in DEWETRON Explorer</tt><br />
<br />
</p>
description<p><code>## 2024-03-08 Release Notice DEWETRON TRION API R7.0.1</code></p>
<p><code>Revision: b1c725da774ed2596fc9e59c111e53bd3f5cf5a1</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.0.1.3193<br />
DEWETRON TRION API | 7.0.1.3193<br />
DEWETRON TRION driver | 7.0.1.3193<br />
DEWETRON DEWE2 driver | 7.0.1.3193</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-7.0.1.3193.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.0.0 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working</code></p>
description<p><code>## 2024-03-08 Release Notice DEWETRON TRION API R7.0.1</code></p>
<p><code>Revision: b1c725da774ed2596fc9e59c111e53bd3f5cf5a1</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.0.1.3193<br />
DEWETRON TRION API | 7.0.1.3193<br />
DEWETRON TRION driver | 7.0.1.3193<br />
DEWETRON DEWE2 driver | 7.0.1.3193</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-7.0.1.3193.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.0.0 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working</code></p>
<p> </p>
description<p><code><tt>## 2024-05-27 Release Notice DEWETRON TRION API R7.1.1</tt></code></p>
<p><code><tt>Revision: 26c98ba4677bc1a19d7e0590475122b6c54e05d3</tt></code></p>
<p><code><tt>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.1.1.4060<br />
DEWETRON TRION API | 7.1.1.4060<br />
DEWETRON TRION driver | 7.1.1.4060<br />
DEWETRON DEWE2 driver | 7.1.1.4060</tt></code></p>
<p><code><tt>## Files<br />
DEWETRON-TRION-Applications-7.1.1.4060.exe</tt></code></p>
<p><code><tt>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.1.1 or higher<br />
* Windows 10 64-Bit or better</tt></code></p>
<p><code><tt>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</tt></code></p>
<p><code><tt>## Fixes<br />
* TRION3-1820-ACC-8-MD fixed firmware showing correct channel status in voltage mode</tt></code></p>
<p><code><tt>## Known Limitations<br />
* NEX[DAQ]-1000 simulation does not support sample rate divider</tt></code></p>
<p><code><tt>## New Firmwares</tt></code></p>
<p><code><tt>HW Support TRION3 modules | Firmware<br />
--------------------------------|-----------<br />
TRION3-1820-ACC-8-MD | FW: 0050</tt></code></p>
description<p><code>## 2024-05-27 Release Notice DEWETRON TRION API R7.1.1</code></p>
<p><code>Revision: 26c98ba4677bc1a19d7e0590475122b6c54e05d3</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.1.1.4060<br />
DEWETRON TRION API | 7.1.1.4060<br />
DEWETRON TRION driver | 7.1.1.4060<br />
DEWETRON DEWE2 driver | 7.1.1.4060</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-7.1.1.4060.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.1.1 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## Fixes<br />
* TRION3-1820-ACC-8-MD fixed firmware showing correct channel status in voltage mode</code></p>
<p><code>## Known Limitations<br />
* NEX[DAQ]-1000 simulation does not support sample rate divider</code></p>
<p><code>## New Firmwares</code></p>
<p><code>HW Support TRION3 modules | Firmware<br />
--------------------------------|-----------<br />
TRION3-1820-ACC-8-MD | FW: 0050</code></p>
description<p><tt>## 2024-08-27 Release Notice DEWETRON TRION API R7.2.1</tt></p>
<p><tt>Revision: 876a648bcaebd47fe225e89ab132256fce382190</tt></p>
<p><tt>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.2.1.5243<br />
DEWETRON TRION API | 7.2.1.5243<br />
DEWETRON TRION driver | 7.2.1.5243<br />
DEWETRON DEWE2 driver | 7.2.1.5243</tt></p>
<p><tt>## Files<br />
DEWETRON-TRION-Applications-7.2.1.5243.exe</tt></p>
<p><tt>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.2.0 or higher<br />
* Windows 10 64-Bit or better</tt></p>
<p><tt>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</tt></p>
<p><tt>## Fixes<br />
* NEX[DAQ]-1000 simulation sample rate divider support fixed.</tt></p>
description<p><tt>## 2024-08-27 Release Notice DEWETRON TRION API R7.2.1</tt></p>
<p><tt>Revision: 876a648bcaebd47fe225e89ab132256fce382190</tt></p>
<p><tt>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.2.1.5243<br />
DEWETRON TRION API | 7.2.1.5243<br />
DEWETRON TRION driver | 7.2.1.5243<br />
DEWETRON DEWE2 driver | 7.2.1.5243</tt></p>
<p><tt>## Files<br />
DEWETRON-TRION-Applications-7.2.1.5243.exe</tt></p>
<p><tt>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.2.0 or higher<br />
* Windows 10 64-Bit or better</tt></p>
<p><tt>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</tt></p>
<p><tt>## Fixes<br />
* NEX[DAQ]-1000 simulation sample rate divider support fixed.</tt></p>
description<p><tt>## 2024-11-20 Release Notice DEWETRON TRION API R7.3.2<br />
Revision: f6f8bf5b1b38b78b8d8a67761130412adeb7e977<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.3.2.6198<br />
DEWETRON TRION API | 7.3.2.6198<br />
DEWETRON TRION driver | 7.3.2.6198<br />
DEWETRON DEWE2 driver | 7.3.2.6198<br />
## Files<br />
DEWETRON-TRION-Applications-7.3.2.6198.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.3.2 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes<br />
* Fix for semaphore handling of date and time changes.</tt></p>
description<p><tt>## 2025-03-05 Release Notice DEWETRON TRION API R7.4.2<br />
Revision: 38d9842531ceafe409e38f55812f2da2aa53be1a<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.4.2.7598<br />
DEWETRON TRION API | 7.4.2.7598<br />
DEWETRON TRION driver | 7.4.2.7598<br />
DEWETRON DEWE2 driver | 7.4.2.7598<br />
## Files<br />
DEWETRON-TRION-Applications-7.4.2.7598.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.4.2 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes and Changes<br />
* TRIONet API returned an invalid number of samples when using i64 getter function<br />
* Removed prototype boards listed in DEWETRON Explorer</tt><br />
<br />
</p>
name(Has Critical Issue, see Notes) DEWETRON TRION R6.7.1 Setup.exe
id653673ca-9660-494b-b368-4827d9c49a3c
active(true)
filesize203856032
versionR6.7.1
oscompatWindows
downloadtypeInstaller (archive)
advancedOnly(false)
internalOnly(false)
language
description<p><code><strong>Known Issue:<br />
TRION(3)-18xx-MULTI: high-pass filter not working except 150 mHz (0,15 Hz)<br />
Please use 150 mHz for correct function</strong></code></p>
<p><br />
<code>## 2023-10-23 Release Notice DEWETRON TRION API R6.7.1</code></p>
<p><code>Revision: 1ee33ea7162d4418af9de534a019b5426b815472</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.1.1582<br />
DEWETRON TRION API | 6.7.1.1582<br />
DEWETRON TRION driver | 6.7.1.1582<br />
DEWETRON DEWE2 driver | 6.7.1.1582</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.7.1.1582.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.1 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* TRION driver fix for last 32bit addressable page (Debian Linux OS)</code></p>
<p><code>## Known Limitations<br />
* None</code></p>
name(Has Critical Issue, see Notes) DEWETRON TRION R6.7.1 Zip
id653673ca-330c-4886-a90d-451fd9c49a3c
active(true)
filesize203646853
versionR6.7.1
oscompatWindows
downloadtypeInstaller (archive)
advancedOnly(false)
internalOnly(false)
language
description<p><strong>Known Issue:<br />
TRION(3)-18xx-MULTI: high-pass filter not working except 150 mHz (0,15 Hz)<br />
Please use 150 mHz for correct function</strong></p>
<p> </p>
<p><code>## 2023-10-23 Release Notice DEWETRON TRION API R6.7.1</code></p>
<p><code>Revision: 1ee33ea7162d4418af9de534a019b5426b815472</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.1.1582<br />
DEWETRON TRION API | 6.7.1.1582<br />
DEWETRON TRION driver | 6.7.1.1582<br />
DEWETRON DEWE2 driver | 6.7.1.1582</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.7.1.1582.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.1 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* TRION driver fix for last 32bit addressable page (Debian Linux OS)</code></p>
<p><code>## Known Limitations<br />
* None</code></p>
description<p><code>## 2023-04-06 Release Notice DEWETRON TRION API R6.5.0</code></p>
<p><code>Revision: 945a6696167b443c4c32b869cbd3445a9d9ae37b</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.5.0.65368<br />
DEWETRON TRION API | 6.5.0.65368<br />
DEWETRON TRION driver | 6.5.0.65368<br />
DEWETRON DEWE2 driver | 6.5.0.65368</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.5.0.65368.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.5 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes:<br />
* TRION3-1802-dLV: Full support added<br />
* TRION3-1600-dLV: Full support added<br />
* Chassis Controller 2:<br />
* Frequency-Out support<br />
* IRIG Out support</code></p>
<p><code>## Known Limitations<br />
* None</code></p>
<p> </p>
description<p><tt>## 2023-12-04 Release Notice DEWETRON TRION API R6.7.2</tt></p>
<p><tt>Revision: 6e29cade2bda4c122e6674a6263aeb6b6bb16c2c</tt></p>
<p><tt>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.2.2175<br />
DEWETRON TRION API | 6.7.2.2175<br />
DEWETRON TRION driver | 6.7.2.2175<br />
DEWETRON DEWE2 driver | 6.7.2.2175</tt></p>
<p><tt>## Files<br />
DEWETRON-TRION-Applications-6.7.2.2175.exe</tt></p>
<p><tt>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.1 or higher<br />
* Windows 10 64-Bit or better</tt></p>
<p><tt>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</tt></p>
<p><tt>## New Features and most important bugfixes<br />
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal<br />
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML<br />
* CHASSIS-CONTROLLER-V2: Fixed an issue with spikes when using CAN OUT (new fw)</tt></p>
<p><tt>## Known Limitations<br />
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected</tt></p>
<p><tt>## New Firmwares</tt></p>
<p><tt>HW Support DEWE3 chassis | Firmware<br />
--------------------------------|-----------<br />
DEWE3-A4 | FW: x0038 MCU: 0x01000109<br />
DEWE3-M4 | FW: x0038 MCU: 0x01000109</tt></p>
<p> </p>
description<p><tt>## 2024-11-20 Release Notice DEWETRON TRION API R7.3.2<br />
Revision: f6f8bf5b1b38b78b8d8a67761130412adeb7e977<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.3.2.6198<br />
DEWETRON TRION API | 7.3.2.6198<br />
DEWETRON TRION driver | 7.3.2.6198<br />
DEWETRON DEWE2 driver | 7.3.2.6198<br />
## Files<br />
DEWETRON-TRION-Applications-7.3.2.6198.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.3.2 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes<br />
* Fix for semaphore handling of date and time changes.</tt><br />
</p>
description<p><code>## 2024-03-08 Release Notice DEWETRON TRION API R6.7.4</code></p>
<p><code>Revision: 5bfa00ce7c0d900ebe46b42d7ee420c3e28c8f2d</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.4.3192<br />
DEWETRON TRION API | 6.7.4.3192<br />
DEWETRON TRION driver | 6.7.4.3192<br />
DEWETRON DEWE2 driver | 6.7.4.3192</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.7.4.3192.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.3 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working</code></p>
<p> </p>
description<p><code>## 2023-04-06 Release Notice DEWETRON TRION API R6.5.0</code></p>
<p><code>Revision: 945a6696167b443c4c32b869cbd3445a9d9ae37b</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.5.0.65368<br />
DEWETRON TRION API | 6.5.0.65368<br />
DEWETRON TRION driver | 6.5.0.65368<br />
DEWETRON DEWE2 driver | 6.5.0.65368</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.5.0.65368.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.5 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes:<br />
* TRION3-1802-dLV: Full support added<br />
* TRION3-1600-dLV: Full support added<br />
* Chassis Controller 2:<br />
* Frequency-Out support<br />
* IRIG Out support</code></p>
<p><code>## Known Limitations<br />
* None</code></p>
<p> </p>
description<p><tt>## 2023-12-04 Release Notice DEWETRON TRION API R6.7.2</tt></p>
<p><tt>Revision: 6e29cade2bda4c122e6674a6263aeb6b6bb16c2c</tt></p>
<p><tt>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.2.2175<br />
DEWETRON TRION API | 6.7.2.2175<br />
DEWETRON TRION driver | 6.7.2.2175<br />
DEWETRON DEWE2 driver | 6.7.2.2175</tt></p>
<p><tt>## Files<br />
DEWETRON-TRION-Applications-6.7.2.2175.exe</tt></p>
<p><tt>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.1 or higher<br />
* Windows 10 64-Bit or better</tt></p>
<p><tt>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</tt></p>
<p><tt>## New Features and most important bugfixes<br />
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal<br />
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML<br />
* CHASSIS-CONTROLLER-V2: Fixed an issue with spikes when using CAN OUT (new fw)</tt></p>
<p><tt>## Known Limitations<br />
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected</tt></p>
<p><tt>## New Firmwares</tt></p>
<p><tt>HW Support DEWE3 chassis | Firmware<br />
--------------------------------|-----------<br />
DEWE3-A4 | FW: x0038 MCU: 0x01000109<br />
DEWE3-M4 | FW: x0038 MCU: 0x01000109</tt></p>
<p> </p>
description<p><code>## 2024-03-08 Release Notice DEWETRON TRION API R6.7.4</code></p>
<p><code>Revision: 5bfa00ce7c0d900ebe46b42d7ee420c3e28c8f2d</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.4.3192<br />
DEWETRON TRION API | 6.7.4.3192<br />
DEWETRON TRION driver | 6.7.4.3192<br />
DEWETRON DEWE2 driver | 6.7.4.3192</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.7.4.3192.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.3 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working</code></p>
<p> </p>
