## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.6 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION(3)-1820-MULTI:
* Input coupling (highpass filter) overshoot fixed with 0.15Hz filter
* TRIONet3 support
* TRION(3)-Power:
* TRION SUB-XV support
* TRION3-SUB-8:
* TRION SUB-XV support
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION driver fix for last 32bit addressable page (Debian Linux OS)
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.1 or higher
** Windows 10 64-Bit or Windows 7 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
* Fixes:
** Fixed: Sometimes TRION-X-CB-16-D was not found at startup
** Fixed: Stabilization of DEWETRON Explorer when using TRIONet
** Fixed: Support of TEDS Chaining for future usage in OXYGEN
** Fixed: Fix in calculation of SUB-CUR Delay Compensation
** Fixed: Fix of starting issue of multiple TRION-1820-POWER-4
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.1 or higher
** Windows 10 64-Bit or Windows 7 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* Fixes:
** MSI:
- MSI2-STG, no balance action possible on CB16
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.1 or higher
** Windows 10 64-Bit or Windows 7 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.2 or higher
** Windows 10 64-Bit or Windows 7 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-18XX-MULTI, TRION-18XX-MULTI:
- Allow up to 60mA Excitation in Bridge Mode
** TRION-1802-dLV:
- Added encoder counter mode
** CB16
- MSI not correctly detected when EPADS are used
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.3 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** PUREC-50 and PUREC-200 support added
** Dark Mode available for DEWETRON Explorer
** Dark Mode available for DEWETRON TRIONCAL
** Selftest for all CAN devices
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.3 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** PUREC-50 and PUREC-200 support added
** Dark Mode available for DEWETRON Explorer
** Dark Mode available for DEWETRON TRIONCAL
** Selftest for all CAN devices
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.4 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-AOUT-8 support added
- Monitor Mode
- Math Output Mode
- Const Output Mode
- Function Generator Mode
** MSI2_V_600 support added
** TRION-TIMING-V3
- Fixed off by 1 second sync issue (PTP)
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.4 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-AOUT-8 support added
- Monitor Mode
- Math Output Mode
- Const Output Mode
- Function Generator Mode
** MSI2_V_600 support added
** TRION-TIMING-V3
- Fixed off by 1 second sync issue (PTP)
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.5 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-1810-SUB-8 added
** TRION3-AOUT-8
- Added discret channel support
** Self Test:
- "Board RAM" test enabled for
- TRION3-1820-MULTI-4-D
- TRION3-1820-MULTI-8-L0B
- TRION3-1850-MULTI-4-D
- TRION3-1850-MULTI-8-L0B
- TRION3-1810M-POWER-4
- TRION3-1810-SUB-8
- TRION3-AOUT-8
- TRION-1600-dLV-16-D
- TRION-1600-dLV-16-D-CAN
- TRION-1600-dLV-32-D
- TRION-1600-dLV-32-D-CAN
- TRION-1802-dLV-16-D
- TRION-1802-dLV-16-D-CAN
- TRION-1802-dLV-32-D
- TRION-1802-dLV-32-D-CAN
- TRION-1820-MULTI-4-D
- TRION-1820-POWER-4
- TRION-1810M-POWER-4
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.5 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-1810-SUB-8 added
** TRION3-AOUT-8
- Added discret channel support
** Self Test:
- "Board RAM" test enabled for
- TRION3-1820-MULTI-4-D
- TRION3-1820-MULTI-8-L0B
- TRION3-1850-MULTI-4-D
- TRION3-1850-MULTI-8-L0B
- TRION3-1810M-POWER-4
- TRION3-1810-SUB-8
- TRION3-AOUT-8
- TRION-1600-dLV-16-D
- TRION-1600-dLV-16-D-CAN
- TRION-1600-dLV-32-D
- TRION-1600-dLV-32-D-CAN
- TRION-1802-dLV-16-D
- TRION-1802-dLV-16-D-CAN
- TRION-1802-dLV-32-D
- TRION-1802-dLV-32-D-CAN
- TRION-1820-MULTI-4-D
- TRION-1820-POWER-4
- TRION-1810M-POWER-4
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.5 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-AOUT-8
- "StreamOutput" Mode added allowing file replay feature
** New firmware fixing reboot issue
- TRION3-1820-MULTI
- TRION3-1820-MULTI-8-L0B
- TRION3-1850-MULTI-4-D
- TRION3-1850-MULTI-8-L0B
- TRION-1820-MULTI-4-D
** TRION-2402-V
- Added oversampling option
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.5 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-AOUT-8
- "StreamOutput" Mode added allowing file replay feature
** New firmware fixing reboot issue
- TRION3-1820-MULTI
- TRION3-1820-MULTI-8-L0B
- TRION3-1850-MULTI-4-D
- TRION3-1850-MULTI-8-L0B
- TRION-1820-MULTI-4-D
** TRION-2402-V
- Added oversampling option
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
- TRION-AO Digital-Out-channels are now labled "DO" in Oxygen channellist (Oxy + API)
- Dewetron Explorer: failed SRAM-Test during selftests now highlighted in red with correct text
- Increased reliablity when scanning for TEDS-devices on systems with high data-load
- TRION-CAN-channels default to "one-shot-mode". So messages that are not acknoledged by any listener will not be retried to be sent autonomously by the transceifer. This is done to decrease latency for CAN-Out and minimizing the risk of message-collisions on bus.
- Oversampling Configuration Item corrected
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
- TRION-AO Digital-Out-channels are now labled "DO" in Oxygen channellist (Oxy + API)
- Dewetron Explorer: failed SRAM-Test during selftests now highlighted in red with correct text
- Increased reliablity when scanning for TEDS-devices on systems with high data-load
- TRION-CAN-channels default to "one-shot-mode". So messages that are not acknoledged by any listener will not be retried to be sent autonomously by the transceifer. This is done to decrease latency for CAN-Out and minimizing the risk of message-collisions on bus.
- Oversampling Configuration Item corrected
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
- Added FPGA firmware protection
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
- Added FPGA firmware protection
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** Added support for TRION3-1820-POWER
** Fixed a bug when TRION-API stops applications from successfully terminating
* Known Limitations:
** None
* HW Support TRION modules:
** TRION3-1820-POWER-4 FW: x0064
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** Added support for TRION3-1820-POWER
** Fixed a bug when TRION-API stops applications from successfully terminating
* Known Limitations:
** None
* HW Support TRION modules:
** TRION3-1820-POWER-4 FW: x0064
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** Support for DEWE3 chassis controller
- Sync: PTP, GPS, IRIG, PPS
- 1xCAN
- 8xDI (or 2xCNT), 4xDO, AUX
** Fixed problems with CAN-traffic smaller 2 Hz
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** Support for DEWE3 chassis controller
- Sync: PTP, GPS, IRIG, PPS
- 1xCAN
- 8xDI (or 2xCNT), 4xDO, AUX
** Fixed problems with CAN-traffic smaller 2 Hz
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0.1 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION-VGPS-100-V3: Fixed acquisition start problem
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0.1 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION-VGPS-100-V3: Fixed acquisition start problem
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0.1 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION-TIMING-V3: Fixed issue detecting the board in a wrong slot
** CAN: Fixed issue when CAN-OUT leads to buffer overflows
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-18XX-MULTI, TRION-18XX-MULTI
- Added support for order 10 iir filter
** IRIG-OUT
- Implemented for TIMING-V3
** TRION3-1810-SUB, TRION3-18XX-Power, TRION-18XX-Power
- Support for SUB-XV added
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-18XX-MULTI, TRION-18XX-MULTI
- Added support for order 10 iir filter
** IRIG-OUT
- Implemented for TIMING-V3
** TRION3-1810-SUB, TRION3-18XX-Power, TRION-18XX-Power
- Support for SUB-XV added
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-18XX-POWER, TRION-18XX-POWER
- Fixed phase error with current delay settings on 1MS ADCs.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-18XX-POWER, TRION-18XX-POWER
- Fixed phase error with current delay settings on 1MS ADCs.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* New chassis: DEWE3-A4L
* TRION3-1820-MULTI, TRION3-1850-MULTI
- Current mode: 2mA range support added
* TRION-1820-MULTI
- Current mode: 2mA range support added
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.5 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-1802-dLV: Full support added
* TRION3-1600-dLV: Full support added
* Chassis Controller 2:
* Frequency-Out support
* IRIG Out support
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.6 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION(3)-1820-MULTI:
* Input coupling (highpass filter) overshoot fixed with 0.15Hz filter
* TRIONet3 support
* TRION(3)-Power:
* TRION SUB-XV support
* TRION3-SUB-8:
* TRION SUB-XV support
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.6.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* NEX[DAQ]-200 device support
* PTP Master functionality for DEWE3-OPT-IRIG/PTP
* TRION(3)-Power:
* TRION SUB-XV fixed
* TRION3-SUB-8:
* TRION SUB-XV fixed
* PUREC
* Fixed MSI detection issue
* CB16D
* Fixed MSI detection issue
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* New chassis: DEWE3-A4L
* TRION3-1820-MULTI, TRION3-1850-MULTI
- Current mode: 2mA range support added
* TRION-1820-MULTI
- Current mode: 2mA range support added
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.5 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-1802-dLV: Full support added
* TRION3-1600-dLV: Full support added
* Chassis Controller 2:
* Frequency-Out support
* IRIG Out support
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.0 or higher
** Windows 10 64-Bit or Windows 7 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** Support for TRION-1810-HV-8
** Support for TRION-SUB-5V, TRION-SUB-600V, TRION-POWER-SUB-dLV-1V, TRION-POWER-SUB-dLV-5V
** Fixed: TRION STAR Output default setting changed from disabled to false
** Fixed: TRION-18xx-POWER-4 startup behavior
** Fixed: TRION-18xx-MULTI firmware issue
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R3.7 or higher
** Windows 10 64-Bit or Windows 7 64-Bit
* Installation procedure:
** Uninstall any previous TRION version via system uninstall (control panel - TRION Applications)
** Reboot system
** Install TRION applications
** Reboot system
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
* New Features and most important bugfixes:
** Fix an issue when not all TRION boards were shown in a DEWE3 chassis
** New firmware for TRION3-CONTROLLER: CHASSIS-CONTROLLER-V1
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0.1 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION-TIMING-V3: Fixed issue detecting the board in a wrong slot
** CAN: Fixed issue when CAN-OUT leads to buffer overflows
* Components:
** DEWETRON MODULES API x64 1.1.0.52645
** DEWETRON MODULES API x86 1.1.0.52645
* Note:
This installer is not needed for OXYGEN as it is integrated in the OXYGEN installer.
Its intended to be used for 3rdparty application support.
(https://github.com/DEWETRON/DAQP-EPAD-MODULES-SDK)
* Requirements:
** Windows 10 64-Bit or Windows 7 64-Bit
* Installation procedure:
** Install DEWETRON-MODULES_API-x86.1.1.0.52645.msi on 32 bit systems
** Install DEWETRON-MODULES_API-x64.1.1.0.52645.msi on 64 bit systems
* New Features and most important bugfixes:
** Fix for using external serial ports (RS232, RS485) (C, CXX)
* Known Limitations:
** None
DEWETRON MODULES API X86 R1.1.0
(DEWETRON-MODULES_API-x86.1.1.0.52645.zip - 1.12 MB) md5: 6e405701d0d908b0b8299ba6625e7844
Version: R1.1.0 Releasedate: 2019-10-04
OS Compatibility: Windows 7/10 | 32bit Language: -
* Components:
** DEWETRON MODULES API x64 1.0.0.52632
** DEWETRON MODULES API x86 1.0.0.52632
* Note:
This installer is not needed for OXYGEN as it is integrated in the OXYGEN installer.
Its intended to be used for 3rdparty application support.
(https://github.com/DEWETRON/DAQP-EPAD-MODULES-SDK)
* Requirements:
** Windows 10 64-Bit or Windows 7 64-Bit
* Installation procedure:
** Install DEWETRON-MODULES_API-x86.1.0.0.52632.msi on 32 bit systems
** Install DEWETRON-MODULES_API-x64.1.0.0.52632.msi on 64 bit systems
* New Features and most important bugfixes:
** Initial public release
SELECT COUNT(*) AS `count` FROM `dewe_cakeisalie`.`productlines` AS `Productline` WHERE `Productline`.`id` = 'sdk'
1
1
0
SELECT `Productline`.`name`, `Productline`.`sort`, `Productline`.`description`, `Productline`.`id`, `Productline`.`slug`, `Productline`.`active` FROM `dewe_cakeisalie`.`productlines` AS `Productline` WHERE `Productline`.`active` = '1' AND (`Productline`.`permissions` & 1 != 0) AND `Productline`.`slug` = 'sdk' LIMIT 1
1
1
0
SELECT `Productgroup`.`slug`, `Productgroup`.`name`, `Productgroup`.`id`, `Productgroup`.`description`, `Productgroup`.`productline_id` FROM `dewe_cakeisalie`.`productgroups` AS `Productgroup` WHERE `Productgroup`.`active` = '1' AND (`Productgroup`.`permissions` & 1 != 0) AND `Productgroup`.`productline_id` = ('5c618a5d-78b4-4153-af4e-1535d9c49a3c') ORDER BY `Productgroup`.`sort` ASC, `Productgroup`.`name` ASC
0
0
0
SELECT `Productfamily`.`name`, `Productfamily`.`slug`, `ProductfamiliesProductline`.`productline_id`, `ProductfamiliesProductline`.`productfamily_id`, `ProductfamiliesProductline`.`id` FROM `dewe_cakeisalie`.`productfamilies` AS `Productfamily` JOIN `dewe_cakeisalie`.`productfamilies_productlines` AS `ProductfamiliesProductline` ON (`ProductfamiliesProductline`.`productline_id` = '5c618a5d-78b4-4153-af4e-1535d9c49a3c' AND `ProductfamiliesProductline`.`productfamily_id` = `Productfamily`.`id`) WHERE `Productfamily`.`active` = '1' AND (`Productfamily`.`permissions` & 1 != 0)
1
1
0
SELECT `Download`.`filename`, `Download`.`sort`, `Download`.`releasedate`, `Download`.`name`, `Download`.`id`, `Download`.`active`, `Download`.`filesize`, `Download`.`version`, `Download`.`oscompat`, `Download`.`downloadtype`, `Download`.`advancedOnly`, `Download`.`internalOnly`, `Download`.`language`, `Download`.`description`, `Download`.`md5`, `Download`.`sha1`, `DownloadsProductline`.`id`, `DownloadsProductline`.`download_id`, `DownloadsProductline`.`productline_id` FROM `dewe_cakeisalie`.`downloads` AS `Download` JOIN `dewe_cakeisalie`.`downloads_productlines` AS `DownloadsProductline` ON (`DownloadsProductline`.`productline_id` = '5c618a5d-78b4-4153-af4e-1535d9c49a3c' AND `DownloadsProductline`.`download_id` = `Download`.`id`) WHERE `Download`.`active` = '1' AND (`Download`.`permissions` & 1 != 0) ORDER BY `Download`.`sort` ASC, `Download`.`downloadtype` ASC, `Download`.`name` ASC
45
45
1
Query Explain:
Click an "Explain" link above, to see the query explanation.
name(Has Critical Issue, see Notes) DEWETRON TRION R6.7.1 Setup.exe
id653673ca-9660-494b-b368-4827d9c49a3c
active(true)
filesize203856032
versionR6.7.1
oscompatWindows
downloadtypeInstaller (archive)
advancedOnly(false)
internalOnly(false)
language
description<p><code><strong>Known Issue:<br />
TRION(3)-18xx-MULTI: high-pass filter not working except 150 mHz (0,15 Hz)<br />
Please use 150 mHz for correct function</strong></code></p>
<p><br />
<code>## 2023-10-23 Release Notice DEWETRON TRION API R6.7.1</code></p>
<p><code>Revision: 1ee33ea7162d4418af9de534a019b5426b815472</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.1.1582<br />
DEWETRON TRION API | 6.7.1.1582<br />
DEWETRON TRION driver | 6.7.1.1582<br />
DEWETRON DEWE2 driver | 6.7.1.1582</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.7.1.1582.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.1 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* TRION driver fix for last 32bit addressable page (Debian Linux OS)</code></p>
<p><code>## Known Limitations<br />
* None</code></p>
description<p><code>## 2023-04-06 Release Notice DEWETRON TRION API R6.5.0</code></p>
<p><code>Revision: 945a6696167b443c4c32b869cbd3445a9d9ae37b</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.5.0.65368<br />
DEWETRON TRION API | 6.5.0.65368<br />
DEWETRON TRION driver | 6.5.0.65368<br />
DEWETRON DEWE2 driver | 6.5.0.65368</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.5.0.65368.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.5 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes:<br />
* TRION3-1802-dLV: Full support added<br />
* TRION3-1600-dLV: Full support added<br />
* Chassis Controller 2:<br />
* Frequency-Out support<br />
* IRIG Out support</code></p>
<p><code>## Known Limitations<br />
* None</code></p>
<p> </p>
description<p>+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<br />
2019-10-04 Release Notice DEWETRON MODULES API R1.1.0</p>
<p>* Version: 1.1.0.52645 (Rev.: 925ea6ce640e9fe25b0e67b8ea18d14204d48a74)</p>
<p>* Components:<br />
** DEWETRON MODULES API x64 1.1.0.52645<br />
** DEWETRON MODULES API x86 1.1.0.52645</p>
<p>* Note:<br />
This installer is not needed for OXYGEN as it is integrated in the OXYGEN installer.<br />
Its intended to be used for 3rdparty application support.<br />
(https://github.com/DEWETRON/DAQP-EPAD-MODULES-SDK)</p>
<p><br />
* Files:<br />
** DEWETRON-MODULES_API-x64.1.1.0.52645.msi<br />
** DEWETRON-MODULES_API-x86.1.1.0.52645.msi </p>
<p>* Requirements:<br />
** Windows 10 64-Bit or Windows 7 64-Bit</p>
<p>* Installation procedure:<br />
** Install DEWETRON-MODULES_API-x86.1.1.0.52645.msi on 32 bit systems<br />
** Install DEWETRON-MODULES_API-x64.1.1.0.52645.msi on 64 bit systems</p>
<p>* New Features and most important bugfixes:<br />
** Fix for using external serial ports (RS232, RS485) (C, CXX)</p>
<p>* Known Limitations:<br />
** None</p>
<p> </p>
description<p><code>## 2023-04-06 Release Notice DEWETRON TRION API R6.5.0</code></p>
<p><code>Revision: 945a6696167b443c4c32b869cbd3445a9d9ae37b</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.5.0.65368<br />
DEWETRON TRION API | 6.5.0.65368<br />
DEWETRON TRION driver | 6.5.0.65368<br />
DEWETRON DEWE2 driver | 6.5.0.65368</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.5.0.65368.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.5 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes:<br />
* TRION3-1802-dLV: Full support added<br />
* TRION3-1600-dLV: Full support added<br />
* Chassis Controller 2:<br />
* Frequency-Out support<br />
* IRIG Out support</code></p>
<p><code>## Known Limitations<br />
* None</code></p>
<p> </p>
