## 2025-03-05 Release Notice DEWETRON TRION API R7.4.2
Revision: 38d9842531ceafe409e38f55812f2da2aa53be1a
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.4.2.7598
DEWETRON TRION API | 7.4.2.7598
DEWETRON TRION driver | 7.4.2.7598
DEWETRON DEWE2 driver | 7.4.2.7598
## Files
DEWETRON-TRION-Applications-7.4.2.7598.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.4.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* TRIONet API returned an invalid number of samples when using i64 getter function
* Removed prototype boards listed in DEWETRON Explorer
## 2025-03-05 Release Notice DEWETRON TRION API R7.4.2
Revision: 38d9842531ceafe409e38f55812f2da2aa53be1a
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.4.2.7598
DEWETRON TRION API | 7.4.2.7598
DEWETRON TRION driver | 7.4.2.7598
DEWETRON DEWE2 driver | 7.4.2.7598
## Files
DEWETRON-TRION-Applications-7.4.2.7598.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.4.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* TRIONet API returned an invalid number of samples when using i64 getter function
* Removed prototype boards listed in DEWETRON Explorer
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working
DEWETRON Issues and Errata
(IssuesAndErrata.pdf - 209 KB) md5: a0549a8bda8d2266a2c69f1e7d4aed77
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.6 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION(3)-1820-MULTI:
* Input coupling (highpass filter) overshoot fixed with 0.15Hz filter
* TRIONet3 support
* TRION(3)-Power:
* TRION SUB-XV support
* TRION3-SUB-8:
* TRION SUB-XV support
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.0.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Dewetron Explorer
* New X icon, better dark mode, splashscreen
* Improved network configuration
* Added set to default (default static, default dhcp)
* Allow configuration even if ip seetings do not match (TRIONet, NEXDAQ)
* CAN-FD bittiming added
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.0.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.0.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.1.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* TRION3-1820-ACC-8-MD fixed firmware showing correct channel status in voltage mode
## Known Limitations
* NEX[DAQ]-1000 simulation does not support sample rate divider
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.1.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* TRION3-1820-ACC-8-MD fixed firmware showing correct channel status in voltage mode
## Known Limitations
* NEX[DAQ]-1000 simulation does not support sample rate divider
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.2.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* NEX[DAQ]-1000 simulation sample rate divider support fixed.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.2.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* NEX[DAQ]-1000 simulation sample rate divider support fixed.
## 2024-11-20 Release Notice DEWETRON TRION API R7.3.2
Revision: f6f8bf5b1b38b78b8d8a67761130412adeb7e977
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.3.2.6198
DEWETRON TRION API | 7.3.2.6198
DEWETRON TRION driver | 7.3.2.6198
DEWETRON DEWE2 driver | 7.3.2.6198
## Files
DEWETRON-TRION-Applications-7.3.2.6198.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.3.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* Fix for semaphore handling of date and time changes.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.4.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* New firmware for 18XX-MULTI fixing spikes in the signal when using CAN OUT
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION driver fix for last 32bit addressable page (Debian Linux OS)
## Known Limitations
* None
(Has Critical Issue, see Notes) DEWETRON TRION R6.7.1 Zip
(DEWETRON TRION R6.7.1.zip - 194.21 MB) md5: 62743ffddad6f659135616521e591b68
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION driver fix for last 32bit addressable page (Debian Linux OS)
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.1 or higher
** Windows 10 64-Bit or Windows 7 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
* Fixes:
** Fixed: Sometimes TRION-X-CB-16-D was not found at startup
** Fixed: Stabilization of DEWETRON Explorer when using TRIONet
** Fixed: Support of TEDS Chaining for future usage in OXYGEN
** Fixed: Fix in calculation of SUB-CUR Delay Compensation
** Fixed: Fix of starting issue of multiple TRION-1820-POWER-4
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.1 or higher
** Windows 10 64-Bit or Windows 7 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* Fixes:
** MSI:
- MSI2-STG, no balance action possible on CB16
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.1 or higher
** Windows 10 64-Bit or Windows 7 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.2 or higher
** Windows 10 64-Bit or Windows 7 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-18XX-MULTI, TRION-18XX-MULTI:
- Allow up to 60mA Excitation in Bridge Mode
** TRION-1802-dLV:
- Added encoder counter mode
** CB16
- MSI not correctly detected when EPADS are used
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.3 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** PUREC-50 and PUREC-200 support added
** Dark Mode available for DEWETRON Explorer
** Dark Mode available for DEWETRON TRIONCAL
** Selftest for all CAN devices
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.3 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** PUREC-50 and PUREC-200 support added
** Dark Mode available for DEWETRON Explorer
** Dark Mode available for DEWETRON TRIONCAL
** Selftest for all CAN devices
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.4 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-AOUT-8 support added
- Monitor Mode
- Math Output Mode
- Const Output Mode
- Function Generator Mode
** MSI2_V_600 support added
** TRION-TIMING-V3
- Fixed off by 1 second sync issue (PTP)
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.4 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-AOUT-8 support added
- Monitor Mode
- Math Output Mode
- Const Output Mode
- Function Generator Mode
** MSI2_V_600 support added
** TRION-TIMING-V3
- Fixed off by 1 second sync issue (PTP)
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.5 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-1810-SUB-8 added
** TRION3-AOUT-8
- Added discret channel support
** Self Test:
- "Board RAM" test enabled for
- TRION3-1820-MULTI-4-D
- TRION3-1820-MULTI-8-L0B
- TRION3-1850-MULTI-4-D
- TRION3-1850-MULTI-8-L0B
- TRION3-1810M-POWER-4
- TRION3-1810-SUB-8
- TRION3-AOUT-8
- TRION-1600-dLV-16-D
- TRION-1600-dLV-16-D-CAN
- TRION-1600-dLV-32-D
- TRION-1600-dLV-32-D-CAN
- TRION-1802-dLV-16-D
- TRION-1802-dLV-16-D-CAN
- TRION-1802-dLV-32-D
- TRION-1802-dLV-32-D-CAN
- TRION-1820-MULTI-4-D
- TRION-1820-POWER-4
- TRION-1810M-POWER-4
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.5 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-1810-SUB-8 added
** TRION3-AOUT-8
- Added discret channel support
** Self Test:
- "Board RAM" test enabled for
- TRION3-1820-MULTI-4-D
- TRION3-1820-MULTI-8-L0B
- TRION3-1850-MULTI-4-D
- TRION3-1850-MULTI-8-L0B
- TRION3-1810M-POWER-4
- TRION3-1810-SUB-8
- TRION3-AOUT-8
- TRION-1600-dLV-16-D
- TRION-1600-dLV-16-D-CAN
- TRION-1600-dLV-32-D
- TRION-1600-dLV-32-D-CAN
- TRION-1802-dLV-16-D
- TRION-1802-dLV-16-D-CAN
- TRION-1802-dLV-32-D
- TRION-1802-dLV-32-D-CAN
- TRION-1820-MULTI-4-D
- TRION-1820-POWER-4
- TRION-1810M-POWER-4
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.5 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-AOUT-8
- "StreamOutput" Mode added allowing file replay feature
** New firmware fixing reboot issue
- TRION3-1820-MULTI
- TRION3-1820-MULTI-8-L0B
- TRION3-1850-MULTI-4-D
- TRION3-1850-MULTI-8-L0B
- TRION-1820-MULTI-4-D
** TRION-2402-V
- Added oversampling option
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.5 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-AOUT-8
- "StreamOutput" Mode added allowing file replay feature
** New firmware fixing reboot issue
- TRION3-1820-MULTI
- TRION3-1820-MULTI-8-L0B
- TRION3-1850-MULTI-4-D
- TRION3-1850-MULTI-8-L0B
- TRION-1820-MULTI-4-D
** TRION-2402-V
- Added oversampling option
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
- TRION-AO Digital-Out-channels are now labled "DO" in Oxygen channellist (Oxy + API)
- Dewetron Explorer: failed SRAM-Test during selftests now highlighted in red with correct text
- Increased reliablity when scanning for TEDS-devices on systems with high data-load
- TRION-CAN-channels default to "one-shot-mode". So messages that are not acknoledged by any listener will not be retried to be sent autonomously by the transceifer. This is done to decrease latency for CAN-Out and minimizing the risk of message-collisions on bus.
- Oversampling Configuration Item corrected
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
- TRION-AO Digital-Out-channels are now labled "DO" in Oxygen channellist (Oxy + API)
- Dewetron Explorer: failed SRAM-Test during selftests now highlighted in red with correct text
- Increased reliablity when scanning for TEDS-devices on systems with high data-load
- TRION-CAN-channels default to "one-shot-mode". So messages that are not acknoledged by any listener will not be retried to be sent autonomously by the transceifer. This is done to decrease latency for CAN-Out and minimizing the risk of message-collisions on bus.
- Oversampling Configuration Item corrected
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
- Added FPGA firmware protection
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** Added support for TRION3-1820-POWER
** Fixed a bug when TRION-API stops applications from successfully terminating
* Known Limitations:
** None
* HW Support TRION modules:
** TRION3-1820-POWER-4 FW: x0064
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.6 or higher
** Windows 10 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** Added support for TRION3-1820-POWER
** Fixed a bug when TRION-API stops applications from successfully terminating
* Known Limitations:
** None
* HW Support TRION modules:
** TRION3-1820-POWER-4 FW: x0064
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** Support for DEWE3 chassis controller
- Sync: PTP, GPS, IRIG, PPS
- 1xCAN
- 8xDI (or 2xCNT), 4xDO, AUX
** Fixed problems with CAN-traffic smaller 2 Hz
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** Support for DEWE3 chassis controller
- Sync: PTP, GPS, IRIG, PPS
- 1xCAN
- 8xDI (or 2xCNT), 4xDO, AUX
** Fixed problems with CAN-traffic smaller 2 Hz
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0.1 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION-VGPS-100-V3: Fixed acquisition start problem
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0.1 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION-VGPS-100-V3: Fixed acquisition start problem
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0.1 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION-TIMING-V3: Fixed issue detecting the board in a wrong slot
** CAN: Fixed issue when CAN-OUT leads to buffer overflows
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-18XX-MULTI, TRION-18XX-MULTI
- Added support for order 10 iir filter
** IRIG-OUT
- Implemented for TIMING-V3
** TRION3-1810-SUB, TRION3-18XX-Power, TRION-18XX-Power
- Support for SUB-XV added
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION3-18XX-MULTI, TRION-18XX-MULTI
- Added support for order 10 iir filter
** IRIG-OUT
- Implemented for TIMING-V3
** TRION3-1810-SUB, TRION3-18XX-Power, TRION-18XX-Power
- Support for SUB-XV added
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-18XX-MULTI, TRION-18XX-MULTI
- Fix for CAN delay issue with FW 0x0033
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-18XX-POWER, TRION-18XX-POWER
- Fixed slot 3 issues
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-18XX-POWER, TRION-18XX-POWER
- Fixed phase error with current delay settings on 1MS ADCs.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-18XX-POWER, TRION-18XX-POWER
- Fixed phase error with current delay settings on 1MS ADCs.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* New chassis: DEWE3-A4L
* TRION3-1820-MULTI, TRION3-1850-MULTI
- Current mode: 2mA range support added
* TRION-1820-MULTI
- Current mode: 2mA range support added
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.5 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-1802-dLV: Full support added
* TRION3-1600-dLV: Full support added
* Chassis Controller 2:
* Frequency-Out support
* IRIG Out support
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.6 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION(3)-1820-MULTI:
* Input coupling (highpass filter) overshoot fixed with 0.15Hz filter
* TRIONet3 support
* TRION(3)-Power:
* TRION SUB-XV support
* TRION3-SUB-8:
* TRION SUB-XV support
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.6.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* NEX[DAQ]-200 device support
* PTP Master functionality for DEWE3-OPT-IRIG/PTP
* TRION(3)-Power:
* TRION SUB-XV fixed
* TRION3-SUB-8:
* TRION SUB-XV fixed
* PUREC
* Fixed MSI detection issue
* CB16D
* Fixed MSI detection issue
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.6.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* NEX[DAQ]-200 device support
* PTP Master functionality for DEWE3-OPT-IRIG/PTP
* TRION(3)-Power:
* TRION SUB-XV fixed
* TRION3-SUB-8:
* TRION SUB-XV fixed
* PUREC
* Fixed MSI detection issue
* CB16D
* Fixed MSI detection issue
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML
* CHASSIS-CONTROLLER-V2: Fixed an issue with spikes when using CAN OUT (new fw)
## Known Limitations
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## 2024-11-20 Release Notice DEWETRON TRION API R7.3.2
Revision: f6f8bf5b1b38b78b8d8a67761130412adeb7e977
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.3.2.6198
DEWETRON TRION API | 7.3.2.6198
DEWETRON TRION driver | 7.3.2.6198
DEWETRON DEWE2 driver | 7.3.2.6198
## Files
DEWETRON-TRION-Applications-7.3.2.6198.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.3.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* Fix for semaphore handling of date and time changes.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.4.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* New firmware for 18XX-MULTI fixing spikes in the signal when using CAN OUT
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.3 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* New chassis: DEWE3-A4L
* TRION3-1820-MULTI, TRION3-1850-MULTI
- Current mode: 2mA range support added
* TRION-1820-MULTI
- Current mode: 2mA range support added
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.5 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes:
* TRION3-1802-dLV: Full support added
* TRION3-1600-dLV: Full support added
* Chassis Controller 2:
* Frequency-Out support
* IRIG Out support
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R6.7.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## New Features and most important bugfixes
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML
* CHASSIS-CONTROLLER-V2: Fixed an issue with spikes when using CAN OUT (new fw)
## Known Limitations
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R5.0 or higher
** Windows 10 64-Bit or Windows 7 64-Bit
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** Support for TRION-1810-HV-8
** Support for TRION-SUB-5V, TRION-SUB-600V, TRION-POWER-SUB-dLV-1V, TRION-POWER-SUB-dLV-5V
** Fixed: TRION STAR Output default setting changed from disabled to false
** Fixed: TRION-18xx-POWER-4 startup behavior
** Fixed: TRION-18xx-MULTI firmware issue
* Requirements:
** Update all TRION modules to the latest firmware included in this release
** Use OXYGEN R6.0.1 or higher
** Windows 10 64-Bit or better
* Installation procedure:
** Install TRION applications
** Reboot system (if requested by the installer)
** Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
** Power-cycle TRION boards (Power down system, then restart)
** Start DEWETRON Explorer and check for a successful firmware upgrade
* New Features and most important bugfixes:
** TRION-TIMING-V3: Fixed issue detecting the board in a wrong slot
** CAN: Fixed issue when CAN-OUT leads to buffer overflows
* Requirements:
** Windows 10 64-Bit or Windows 11 64-Bit
** NI LabVIEW 2018 or higher (32 bit and 64 bit)
** DEWETRON-TRION-Applications-7.4.2.7598 or higher
* Installation procedure
** Can be installed by using LabVIEW Package Manager
* Description
** Native LabVIEW driver for TRION & TRION3 modules
** Documentation included in the source code
** Dedicated functions included in separate VIs for hardware configuration
** Programming examples for different use cases included
** Supports TRION & TRION3 modules in DEWE2 (incl. TRIONet(3)) & DEWE3 chassis
** Supports one or several NEX[DAQ] connected via USB or Ethernet
** Synchronization via internal DEWE2/DEWE3 chassis clock
** Synchronization of several DEWE2/DEWE3 (CC-V1 & CC-V2) chassis via TRION Sync I/O
** Synchronization of several NEXD[DAQ] via PTP
** Supported Channel types:
*** Analog inputs (AI)
*** Analog outputs (AO)
*** Digital inputs (DI)
*** Digital outputs (DO)
*** Counter inputs (CNT)
*** CAN message receive
*** CAN message decode (for LabVIEW 32 bit)
*** Recognition of MSIs & SUB modules
* Known Limitations
** External Synchronization signals not supported
** Maximum tested data rate: 200 MB/s (corresponds to 48 AI á 1 MS/s á 24 bit)
** NEX[DAQ] limitation in daisy-chain wiring: 100 MB/s max. data rate
** CAN-FD on NEX[DAQ]
** CAN message decode (for LabVIEW 64 bit due to missing LabVIEW library)
** CAN output
* Changes from v0.0.0.14 to v0.0.0.23
** Support and synchronization of several NEX[DAQ] via PTP
** Bugfixing for MSI support with NEX[DAQ] and TRION(3)-MULTI
* Changes from v0.0.0.13 to v0.0.0.14
** Synchronization of several DEWE2/DEWE3 (CC-V1 & CC-V2) chassis via TRION Sync I/O added
* Changes from v0.0.0.8 to v0.0.0.13
** New supported channel types:
*** Analog outputs (AO)
*** Digital outputs (DO)
*** CAN message receive
*** CAN message decode (for LabVIEW 32 bit)
** TRIONet supported
* Changes from v0.0.0.7 to v0.0.0.8
** If-1 is entered for ShuntResistance the Parameter won't be set
** The number format has now also been set to a point as a decimal separator for the InputOffset
** Only integer values can now be entered for ShuntResistance
SELECT COUNT(*) AS `count` FROM `dewe_cakeisalie`.`products` AS `Product` WHERE `Product`.`id` = 'dewe2-f18'
1
1
0
SELECT `Product`.`name`, `Product`.`sort`, `Product`.`description`, `Product`.`id`, `Product`.`slug`, `Product`.`active`, `Product`.`permissions`, `Productgroup`.`slug`, `Productgroup`.`name`, `Productgroup`.`id` FROM `dewe_cakeisalie`.`products` AS `Product` LEFT JOIN `dewe_cakeisalie`.`productgroups` AS `Productgroup` ON (`Product`.`productgroup_id` = `Productgroup`.`id` AND `Productgroup`.`active` = '1' AND (`Productgroup`.`permissions` & 1 != 0)) WHERE `Product`.`active` = '1' AND (`Product`.`permissions` & 1 != 0) AND `Product`.`slug` = 'dewe2-f18' ORDER BY `Productgroup`.`sort` ASC, `Productgroup`.`name` ASC LIMIT 1
1
1
0
SELECT `Download`.`description`, `Download`.`language`, `Download`.`filename`, `Download`.`releasedate`, `Download`.`name`, `Download`.`id`, `Download`.`active`, `Download`.`filesize`, `Download`.`version`, `Download`.`oscompat`, `Download`.`downloadtype`, `Download`.`advancedOnly`, `Download`.`internalOnly`, `Download`.`md5`, `Download`.`sha1`, `DownloadsProduct`.`product_id`, `DownloadsProduct`.`download_id`, `DownloadsProduct`.`id` FROM `dewe_cakeisalie`.`downloads` AS `Download` JOIN `dewe_cakeisalie`.`downloads_products` AS `DownloadsProduct` ON (`DownloadsProduct`.`product_id` = '538f1c20-b708-43df-bdd1-3aedd9c49861' AND `DownloadsProduct`.`download_id` = `Download`.`id`) WHERE `Download`.`active` = '1' AND (`Download`.`permissions` & 1 != 0) ORDER BY `Download`.`downloadtype` ASC, `Download`.`sort` ASC, `Download`.`name` ASC
68
68
1
Query Explain:
Click an "Explain" link above, to see the query explanation.
description<p><tt>## 2025-03-05 Release Notice DEWETRON TRION API R7.4.2<br />
Revision: 38d9842531ceafe409e38f55812f2da2aa53be1a<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.4.2.7598<br />
DEWETRON TRION API | 7.4.2.7598<br />
DEWETRON TRION driver | 7.4.2.7598<br />
DEWETRON DEWE2 driver | 7.4.2.7598<br />
## Files<br />
DEWETRON-TRION-Applications-7.4.2.7598.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.4.2 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes and Changes<br />
* TRIONet API returned an invalid number of samples when using i64 getter function<br />
* Removed prototype boards listed in DEWETRON Explorer</tt><br />
<br />
</p>
language
filenameDEWETRON TRION R7.4.2.zip
releasedate2025-03-05
nameDEWETRON TRION R7.4.2 Zip
id67c84a95-a96c-4bb6-a11f-4c7ed9c49a3c
active(true)
filesize131624389
versionR7.4.2
oscompatWindows
downloadtypeInstaller
advancedOnly(false)
internalOnly(false)
md5e00298d2d3f173584037cd27f07168bc
sha19bfddf7652e3e257aa7f9448f9302fc92454bf7f
DownloadsProduct(array)
product_id538f1c20-b708-43df-bdd1-3aedd9c49861
download_id67c84a95-a96c-4bb6-a11f-4c7ed9c49a3c
id67c84be2-48d0-4a46-8145-414dd9c49a3c
2(array)
description<p><tt>## 2025-03-05 Release Notice DEWETRON TRION API R7.4.2<br />
Revision: 38d9842531ceafe409e38f55812f2da2aa53be1a<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.4.2.7598<br />
DEWETRON TRION API | 7.4.2.7598<br />
DEWETRON TRION driver | 7.4.2.7598<br />
DEWETRON DEWE2 driver | 7.4.2.7598<br />
## Files<br />
DEWETRON-TRION-Applications-7.4.2.7598.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.4.2 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes and Changes<br />
* TRIONet API returned an invalid number of samples when using i64 getter function<br />
* Removed prototype boards listed in DEWETRON Explorer</tt><br />
<br />
</p>
description<p><code>## 2024-03-08 Release Notice DEWETRON TRION API R6.7.4</code></p>
<p><code>Revision: 5bfa00ce7c0d900ebe46b42d7ee420c3e28c8f2d</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.4.3192<br />
DEWETRON TRION API | 6.7.4.3192<br />
DEWETRON TRION driver | 6.7.4.3192<br />
DEWETRON DEWE2 driver | 6.7.4.3192</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.7.4.3192.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.3 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working</code></p>
<p> </p>
description<p><code>## 2024-03-08 Release Notice DEWETRON TRION API R6.7.4</code></p>
<p><code>Revision: 5bfa00ce7c0d900ebe46b42d7ee420c3e28c8f2d</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.4.3192<br />
DEWETRON TRION API | 6.7.4.3192<br />
DEWETRON TRION driver | 6.7.4.3192<br />
DEWETRON DEWE2 driver | 6.7.4.3192</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.7.4.3192.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.3 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working</code></p>
<p> </p>
description<p><code>## 2024-03-08 Release Notice DEWETRON TRION API R7.0.1</code></p>
<p><code>Revision: b1c725da774ed2596fc9e59c111e53bd3f5cf5a1</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.0.1.3193<br />
DEWETRON TRION API | 7.0.1.3193<br />
DEWETRON TRION driver | 7.0.1.3193<br />
DEWETRON DEWE2 driver | 7.0.1.3193</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-7.0.1.3193.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.0.0 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working</code></p>
description<p><code>## 2024-03-08 Release Notice DEWETRON TRION API R7.0.1</code></p>
<p><code>Revision: b1c725da774ed2596fc9e59c111e53bd3f5cf5a1</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.0.1.3193<br />
DEWETRON TRION API | 7.0.1.3193<br />
DEWETRON TRION driver | 7.0.1.3193<br />
DEWETRON DEWE2 driver | 7.0.1.3193</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-7.0.1.3193.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.0.0 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* Fix: MSI2-CH-100 with TRION3-18XX-Multi not working</code></p>
<p> </p>
language
filenameDEWETRON TRION R7.0.1.zip
releasedate2024-03-08
nameDEWETRON TRION R7.0.1 Zip
id65eac976-e158-4274-ae28-490ad9c49a3c
active(true)
filesize215728559
versionR7.0.1
oscompatWindows
downloadtypeInstaller (archive)
advancedOnly(false)
internalOnly(false)
md54254f56149424e385f34648b08eae345
sha17d856d16235156755170100bf2ca878e28b494b5
DownloadsProduct(array)
product_id538f1c20-b708-43df-bdd1-3aedd9c49861
download_id65eac976-e158-4274-ae28-490ad9c49a3c
id66544710-c5f0-4b89-88c1-4318d9c49a3c
11(array)
description<p><code><tt>## 2024-05-27 Release Notice DEWETRON TRION API R7.1.1</tt></code></p>
<p><code><tt>Revision: 26c98ba4677bc1a19d7e0590475122b6c54e05d3</tt></code></p>
<p><code><tt>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.1.1.4060<br />
DEWETRON TRION API | 7.1.1.4060<br />
DEWETRON TRION driver | 7.1.1.4060<br />
DEWETRON DEWE2 driver | 7.1.1.4060</tt></code></p>
<p><code><tt>## Files<br />
DEWETRON-TRION-Applications-7.1.1.4060.exe</tt></code></p>
<p><code><tt>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.1.1 or higher<br />
* Windows 10 64-Bit or better</tt></code></p>
<p><code><tt>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</tt></code></p>
<p><code><tt>## Fixes<br />
* TRION3-1820-ACC-8-MD fixed firmware showing correct channel status in voltage mode</tt></code></p>
<p><code><tt>## Known Limitations<br />
* NEX[DAQ]-1000 simulation does not support sample rate divider</tt></code></p>
<p><code><tt>## New Firmwares</tt></code></p>
<p><code><tt>HW Support TRION3 modules | Firmware<br />
--------------------------------|-----------<br />
TRION3-1820-ACC-8-MD | FW: 0050</tt></code></p>
description<p><code>## 2024-05-27 Release Notice DEWETRON TRION API R7.1.1</code></p>
<p><code>Revision: 26c98ba4677bc1a19d7e0590475122b6c54e05d3</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.1.1.4060<br />
DEWETRON TRION API | 7.1.1.4060<br />
DEWETRON TRION driver | 7.1.1.4060<br />
DEWETRON DEWE2 driver | 7.1.1.4060</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-7.1.1.4060.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.1.1 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## Fixes<br />
* TRION3-1820-ACC-8-MD fixed firmware showing correct channel status in voltage mode</code></p>
<p><code>## Known Limitations<br />
* NEX[DAQ]-1000 simulation does not support sample rate divider</code></p>
<p><code>## New Firmwares</code></p>
<p><code>HW Support TRION3 modules | Firmware<br />
--------------------------------|-----------<br />
TRION3-1820-ACC-8-MD | FW: 0050</code></p>
language
filenameDEWETRON TRION R7.1.1.zip
releasedate2024-05-27
nameDEWETRON TRION R7.1.1 Zip
id665445ba-ef9c-415a-9dd7-4f85d9c49a3c
active(true)
filesize228444012
versionR7.1.1
oscompatWindows
downloadtypeInstaller (archive)
advancedOnly(false)
internalOnly(false)
md58ec1488966b59cf0e5c27054bde550df
sha19081b86bcfedc4a6a446ecfb83fe44f33254c4a8
DownloadsProduct(array)
product_id538f1c20-b708-43df-bdd1-3aedd9c49861
download_id665445ba-ef9c-415a-9dd7-4f85d9c49a3c
id66cda803-3ee8-45a6-a7b2-43ccd9c49a3c
13(array)
description<p><tt>## 2024-08-27 Release Notice DEWETRON TRION API R7.2.1</tt></p>
<p><tt>Revision: 876a648bcaebd47fe225e89ab132256fce382190</tt></p>
<p><tt>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.2.1.5243<br />
DEWETRON TRION API | 7.2.1.5243<br />
DEWETRON TRION driver | 7.2.1.5243<br />
DEWETRON DEWE2 driver | 7.2.1.5243</tt></p>
<p><tt>## Files<br />
DEWETRON-TRION-Applications-7.2.1.5243.exe</tt></p>
<p><tt>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.2.0 or higher<br />
* Windows 10 64-Bit or better</tt></p>
<p><tt>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</tt></p>
<p><tt>## Fixes<br />
* NEX[DAQ]-1000 simulation sample rate divider support fixed.</tt></p>
description<p><tt>## 2024-08-27 Release Notice DEWETRON TRION API R7.2.1</tt></p>
<p><tt>Revision: 876a648bcaebd47fe225e89ab132256fce382190</tt></p>
<p><tt>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.2.1.5243<br />
DEWETRON TRION API | 7.2.1.5243<br />
DEWETRON TRION driver | 7.2.1.5243<br />
DEWETRON DEWE2 driver | 7.2.1.5243</tt></p>
<p><tt>## Files<br />
DEWETRON-TRION-Applications-7.2.1.5243.exe</tt></p>
<p><tt>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.2.0 or higher<br />
* Windows 10 64-Bit or better</tt></p>
<p><tt>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</tt></p>
<p><tt>## Fixes<br />
* NEX[DAQ]-1000 simulation sample rate divider support fixed.</tt></p>
language
filenameDEWETRON TRION R7.2.1.zip
releasedate2024-08-27
nameDEWETRON TRION R7.2.1 Zip
id66cda3b8-4f7c-4949-b227-05ebd9c49a3c
active(true)
filesize236568934
versionR7.2.1
oscompatWindows
downloadtypeInstaller (archive)
advancedOnly(false)
internalOnly(false)
md5f75aef26aabb1a61616420da19f19eb2
sha1967e9cc827f082aec0a65eb6745c9d67dd74b3a2
DownloadsProduct(array)
product_id538f1c20-b708-43df-bdd1-3aedd9c49861
download_id66cda3b8-4f7c-4949-b227-05ebd9c49a3c
id6735e1b3-7b7c-4bea-88f5-4236d9c49a3c
15(array)
description<p><tt>## 2024-11-20 Release Notice DEWETRON TRION API R7.3.2<br />
Revision: f6f8bf5b1b38b78b8d8a67761130412adeb7e977<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.3.2.6198<br />
DEWETRON TRION API | 7.3.2.6198<br />
DEWETRON TRION driver | 7.3.2.6198<br />
DEWETRON DEWE2 driver | 7.3.2.6198<br />
## Files<br />
DEWETRON-TRION-Applications-7.3.2.6198.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.3.2 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes<br />
* Fix for semaphore handling of date and time changes.</tt></p>
language
filenameDEWETRON TRION R7.3.2.zip
releasedate2024-11-27
nameDEWETRON TRION R7.3.2 Zip
id6746fd2e-cad8-4309-9a23-49f3d9c49a3c
active(true)
filesize243600488
versionR7.3.2
oscompatWindows
downloadtypeInstaller (archive)
advancedOnly(false)
internalOnly(false)
md5070c2e22a0ae50a40fbd30154c7e247c
sha12bd3c08c99479fb8c50a2d4c1dbfe81eed5d355f
DownloadsProduct(array)
product_id538f1c20-b708-43df-bdd1-3aedd9c49861
download_id6746fd2e-cad8-4309-9a23-49f3d9c49a3c
id67b31d81-74dc-426b-a6ac-4e9dd9c49a3c
16(array)
description<p><tt>## 2025-02-17 Release Notice DEWETRON TRION API R7.4.1</tt></p>
<p><tt>Revision: 57b8f7de701145d7610724e638c3dfbe599f66cf</tt></p>
<p><tt>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.4.1.7232<br />
DEWETRON TRION API | 7.4.1.7232<br />
DEWETRON TRION driver | 7.4.1.7232<br />
DEWETRON DEWE2 driver | 7.4.1.7232</tt></p>
<p><tt>## Files<br />
DEWETRON-TRION-Applications-7.4.1.7232.exe</tt></p>
<p><tt>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.4.1 or higher<br />
* Windows 10 64-Bit or better</tt></p>
<p><tt>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</tt></p>
<p><tt>## Fixes and Changes<br />
* New firmware for 18XX-MULTI fixing spikes in the signal when using CAN OUT</tt></p>
<p><tt>## New Firmwares</tt></p>
<p><tt>HW Support TRION3 modules | Firmware<br />
--------------------------------|-----------<br />
TRION3-1801-MULTI-8-L0B | FW: 0053<br />
TRION3-1802-MULTI-8-L0B | FW: 0053<br />
TRION3-1810-MULTI-8-L0B | FW: 0053<br />
TRION3-1820-MULTI-4-D | FW: 0053<br />
TRION3-1820-MULTI-8-L0B | FW: 0053<br />
TRION3-1850-MULTI-4-D | FW: 0053<br />
TRION3-1850-MULTI-8-L0B | FW: 0053</tt></p>
<p><tt>HW Support TRION modules | Firmware<br />
--------------------------------|-----------<br />
TRION-1820-MULTI-4-D | FW: 0053<br />
TRION-1850-MULTI-4-D | FW: 0053</tt></p>
language
filenameDEWETRON TRION R7.4.1.zip
releasedate2025-02-17
nameDEWETRON TRION R7.4.1 Zip
id67b31b0e-eb70-4535-b2bc-4085d9c49a3c
active(true)
filesize131576706
versionR7.4.1
oscompatWindows
downloadtypeInstaller (archive)
advancedOnly(false)
internalOnly(false)
md5954b1039e113180bb2ea08ecfe2a99c4
sha13e00eb70512f487623787f5940d13acd5400c83c
DownloadsProduct(array)
product_id538f1c20-b708-43df-bdd1-3aedd9c49861
download_id67b31b0e-eb70-4535-b2bc-4085d9c49a3c
id67c84bf8-b8fc-4697-9a51-4443d9c49a3c
17(array)
description<p><code><strong>Known Issue:<br />
TRION(3)-18xx-MULTI: high-pass filter not working except 150 mHz (0,15 Hz)<br />
Please use 150 mHz for correct function</strong></code></p>
<p><br />
<code>## 2023-10-23 Release Notice DEWETRON TRION API R6.7.1</code></p>
<p><code>Revision: 1ee33ea7162d4418af9de534a019b5426b815472</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.1.1582<br />
DEWETRON TRION API | 6.7.1.1582<br />
DEWETRON TRION driver | 6.7.1.1582<br />
DEWETRON DEWE2 driver | 6.7.1.1582</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.7.1.1582.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.1 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* TRION driver fix for last 32bit addressable page (Debian Linux OS)</code></p>
<p><code>## Known Limitations<br />
* None</code></p>
name(Has Critical Issue, see Notes) DEWETRON TRION R6.7.1 Setup.exe
id653673ca-9660-494b-b368-4827d9c49a3c
active(true)
filesize203856032
versionR6.7.1
oscompatWindows
downloadtypeInstaller (archive)
advancedOnly(false)
internalOnly(false)
md5e40a1343189f546d5975c1e967f354be
sha1ccb378b06dda2c514cf955574b6682bac449ea91
DownloadsProduct(array)
product_id538f1c20-b708-43df-bdd1-3aedd9c49861
download_id653673ca-9660-494b-b368-4827d9c49a3c
id6746ff5e-5bb0-46f2-8239-4f06d9c49a3c
18(array)
description<p><strong>Known Issue:<br />
TRION(3)-18xx-MULTI: high-pass filter not working except 150 mHz (0,15 Hz)<br />
Please use 150 mHz for correct function</strong></p>
<p> </p>
<p><code>## 2023-10-23 Release Notice DEWETRON TRION API R6.7.1</code></p>
<p><code>Revision: 1ee33ea7162d4418af9de534a019b5426b815472</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.1.1582<br />
DEWETRON TRION API | 6.7.1.1582<br />
DEWETRON TRION driver | 6.7.1.1582<br />
DEWETRON DEWE2 driver | 6.7.1.1582</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.7.1.1582.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.1 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* TRION driver fix for last 32bit addressable page (Debian Linux OS)</code></p>
<p><code>## Known Limitations<br />
* None</code></p>
language
filenameDEWETRON TRION R6.7.1.zip
releasedate2023-10-23
name(Has Critical Issue, see Notes) DEWETRON TRION R6.7.1 Zip
description<p><code>## 2023-04-06 Release Notice DEWETRON TRION API R6.5.0</code></p>
<p><code>Revision: 945a6696167b443c4c32b869cbd3445a9d9ae37b</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.5.0.65368<br />
DEWETRON TRION API | 6.5.0.65368<br />
DEWETRON TRION driver | 6.5.0.65368<br />
DEWETRON DEWE2 driver | 6.5.0.65368</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.5.0.65368.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.5 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes:<br />
* TRION3-1802-dLV: Full support added<br />
* TRION3-1600-dLV: Full support added<br />
* Chassis Controller 2:<br />
* Frequency-Out support<br />
* IRIG Out support</code></p>
<p><code>## Known Limitations<br />
* None</code></p>
<p> </p>
language
filenameDEWETRON TRION R6.5.0.zip
releasedate2023-04-13
nameDEWETRON TRION R6.5.0 Zip
id6437db0f-ac24-4211-bbdb-470bd9c49a3c
active(true)
filesize175422220
versionR6.5.0
oscompatWindows
downloadtypeInstaller (archive)
advancedOnly(false)
internalOnly(false)
md5f197f0c97df896a526b2aa60334a502b
sha1a48b6cb4e93a04518a22b2fa6f06a3445ac7327f
DownloadsProduct(array)
product_id538f1c20-b708-43df-bdd1-3aedd9c49861
download_id6437db0f-ac24-4211-bbdb-470bd9c49a3c
id6502e0d9-a118-4518-b208-4ed5d9c49a3c
51(array)
description<p><code>## 2023-07-24 Release Notice DEWETRON TRION API R6.6.0</code></p>
<p><code>Revision: 98efc4da43ef96f4b384bda3c6ae1c658a374fae</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.6.0.632<br />
DEWETRON TRION API | 6.6.0.632<br />
DEWETRON TRION driver | 6.6.0.632<br />
DEWETRON DEWE2 driver | 6.6.0.632</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.6.0.632.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.6 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* TRION(3)-1820-MULTI:<br />
* Input coupling (highpass filter) overshoot fixed with 0.15Hz filter<br />
* TRIONet3 support<br />
* TRION(3)-Power:<br />
* TRION SUB-XV support<br />
* TRION3-SUB-8:<br />
* TRION SUB-XV support</code></p>
<p><code>## Known Limitations<br />
* None</code></p>
language
filenameDEWETRON TRION R6.6.0.zip
releasedate2023-08-04
nameDEWETRON TRION R6.6.0 Zip
id64ccba49-abb4-4d5f-bbee-463ad9c49a3c
active(true)
filesize189127833
versionR6.6.0
oscompatWindows
downloadtypeInstaller (archive)
advancedOnly(false)
internalOnly(false)
md56cdc6cdae53403e12597cdc7177192db
sha1814832423aa9f33b473bac220a994bde386c6272
DownloadsProduct(array)
product_id538f1c20-b708-43df-bdd1-3aedd9c49861
download_id64ccba49-abb4-4d5f-bbee-463ad9c49a3c
id6502f0e9-8fdc-4f50-9106-40a4d9c49a3c
52(array)
description<p><code>## 2023-09-14 Release Notice DEWETRON TRION API R6.6.1</code></p>
<p><code>Revision: 45fadabcfe6f627121d9a4fc8a177236070b5621</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.6.1.1146<br />
DEWETRON TRION API | 6.6.1.1146<br />
DEWETRON TRION driver | 6.6.1.1146<br />
DEWETRON DEWE2 driver | 6.6.1.1146</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.6.1.1146.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.6.1 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* NEX[DAQ]-200 device support<br />
* PTP Master functionality for DEWE3-OPT-IRIG/PTP<br />
* TRION(3)-Power:<br />
* TRION SUB-XV fixed<br />
* TRION3-SUB-8:<br />
* TRION SUB-XV fixed<br />
* PUREC<br />
* Fixed MSI detection issue<br />
* CB16D<br />
* Fixed MSI detection issue</code></p>
<p><code>## Known Limitations<br />
* None</code></p>
<p><code>## Firmwares</code></p>
<p><code>HW Support TRION modules | Firmware<br />
--------------------------------|-----------<br />
TRION3-1810M-POWER-4 | FW: x0077<br />
TRION-1810-HV-4 | FW: x0077<br />
TRION-1810-HV-8 | FW: x0077<br />
TRION-1820-POWER-4 | FW: x0077<br />
TRION-1810M-POWER-4 | FW: x0077<br />
TRION3-1810-SUB-8 | FW: x0019</code></p>
<p><code>HW Support DEWE3 chassis | Firmware<br />
--------------------------------|-----------<br />
DEWE3-A4 | FW: x0036 MCU: 0x01000109<br />
DEWE3-M4 | FW: x0036 MCU: 0x01000109</code></p>
description<p><code>## 2023-09-14 Release Notice DEWETRON TRION API R6.6.1</code></p>
<p><code>Revision: 45fadabcfe6f627121d9a4fc8a177236070b5621</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.6.1.1146<br />
DEWETRON TRION API | 6.6.1.1146<br />
DEWETRON TRION driver | 6.6.1.1146<br />
DEWETRON DEWE2 driver | 6.6.1.1146</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.6.1.1146.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.6.1 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* NEX[DAQ]-200 device support<br />
* PTP Master functionality for DEWE3-OPT-IRIG/PTP<br />
* TRION(3)-Power:<br />
* TRION SUB-XV fixed<br />
* TRION3-SUB-8:<br />
* TRION SUB-XV fixed<br />
* PUREC<br />
* Fixed MSI detection issue<br />
* CB16D<br />
* Fixed MSI detection issue</code></p>
<p><code>## Known Limitations<br />
* None</code></p>
<p><code>## Firmwares</code></p>
<p><code>HW Support TRION modules | Firmware<br />
--------------------------------|-----------<br />
TRION3-1810M-POWER-4 | FW: x0077<br />
TRION-1810-HV-4 | FW: x0077<br />
TRION-1810-HV-8 | FW: x0077<br />
TRION-1820-POWER-4 | FW: x0077<br />
TRION-1810M-POWER-4 | FW: x0077<br />
TRION3-1810-SUB-8 | FW: x0019</code></p>
<p><code>HW Support DEWE3 chassis | Firmware<br />
--------------------------------|-----------<br />
DEWE3-A4 | FW: x0036 MCU: 0x01000109<br />
DEWE3-M4 | FW: x0036 MCU: 0x01000109</code></p>
language
filenameDEWETRON TRION R6.6.1.zip
releasedate2023-09-14
nameDEWETRON TRION R6.6.1 Zip
id6502ee68-c448-428b-bb46-424fd9c49a3c
active(true)
filesize207729106
versionR6.6.1
oscompatWindows
downloadtypeInstaller (archive)
advancedOnly(false)
internalOnly(false)
md50900a3b6cb4bf9fada9f5bfbd777a8e4
sha1d761565ebf36b6f1dace0b7267b09c531bdeca57
DownloadsProduct(array)
product_id538f1c20-b708-43df-bdd1-3aedd9c49861
download_id6502ee68-c448-428b-bb46-424fd9c49a3c
id653675c8-574c-4246-930c-46f7d9c49a3c
54(array)
description<p><tt>## 2023-12-04 Release Notice DEWETRON TRION API R6.7.2</tt></p>
<p><tt>Revision: 6e29cade2bda4c122e6674a6263aeb6b6bb16c2c</tt></p>
<p><tt>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.2.2175<br />
DEWETRON TRION API | 6.7.2.2175<br />
DEWETRON TRION driver | 6.7.2.2175<br />
DEWETRON DEWE2 driver | 6.7.2.2175</tt></p>
<p><tt>## Files<br />
DEWETRON-TRION-Applications-6.7.2.2175.exe</tt></p>
<p><tt>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.1 or higher<br />
* Windows 10 64-Bit or better</tt></p>
<p><tt>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</tt></p>
<p><tt>## New Features and most important bugfixes<br />
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal<br />
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML<br />
* CHASSIS-CONTROLLER-V2: Fixed an issue with spikes when using CAN OUT (new fw)</tt></p>
<p><tt>## Known Limitations<br />
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected</tt></p>
<p><tt>## New Firmwares</tt></p>
<p><tt>HW Support DEWE3 chassis | Firmware<br />
--------------------------------|-----------<br />
DEWE3-A4 | FW: x0038 MCU: 0x01000109<br />
DEWE3-M4 | FW: x0038 MCU: 0x01000109</tt></p>
<p> </p>
language
filenameDEWETRON TRION R6.7.2.zip
releasedate2023-12-04
nameDEWETRON TRION R6.7.2 Zip
id6571fe62-bb40-41e8-a277-4a1fd9c49a3c
active(true)
filesize208853446
versionR6.7.2
oscompatWindows
downloadtypeInstaller (archive)
advancedOnly(false)
internalOnly(false)
md5e13858f37b69e7d8ff27f3a71e3d1dd9
sha1a86a0388f277b0628f63ea47c58ecfa2e86fbfcd
DownloadsProduct(array)
product_id538f1c20-b708-43df-bdd1-3aedd9c49861
download_id6571fe62-bb40-41e8-a277-4a1fd9c49a3c
id65ccabd9-7d8c-43cf-b8fa-49c7d9c49a3c
55(array)
description<p><code>## 2023-02-14 Release Notice DEWETRON TRION API R6.7.3</code></p>
<p><code>Revision: 7aa6f0e1381c890da5d0df82d545e1a3cac015d7</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.3.2897<br />
DEWETRON TRION API | 6.7.3.2897<br />
DEWETRON TRION driver | 6.7.3.2897<br />
DEWETRON DEWE2 driver | 6.7.3.2897</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.7.3.2897.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.3 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected<br />
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal</code></p>
<p><br />
<code>## New Firmwares</code></p>
<p><code>HW Support TRION modules | Firmware<br />
--------------------------------|-----------<br />
TRION3-1820-MULTI-4-D | FW: x0043<br />
TRION3-1820-MULTI-8-L0B | FW: x0043<br />
TRION3-1850-MULTI-4-D | FW: x0043<br />
TRION3-1850-MULTI-8-L0B | FW: x0043<br />
TRION3-1801-MULTI-8-L0B | FW: x0043<br />
TRION-1820-MULTI-4-D | FW: x0043</code></p>
<p><code>HW Support DEWE3 chassis | Firmware<br />
--------------------------------|-----------<br />
DEWE3-A4 | FW: x0038 MCU: 0x01000109<br />
DEWE3-M4 | FW: x0038 MCU: 0x01000109</code></p>
description<p><code>## 2023-02-14 Release Notice DEWETRON TRION API R6.7.3</code></p>
<p><code>Revision: 7aa6f0e1381c890da5d0df82d545e1a3cac015d7</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.3.2897<br />
DEWETRON TRION API | 6.7.3.2897<br />
DEWETRON TRION driver | 6.7.3.2897<br />
DEWETRON DEWE2 driver | 6.7.3.2897</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.7.3.2897.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.3 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes<br />
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected<br />
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal</code></p>
<p><br />
<code>## New Firmwares</code></p>
<p><code>HW Support TRION modules | Firmware<br />
--------------------------------|-----------<br />
TRION3-1820-MULTI-4-D | FW: x0043<br />
TRION3-1820-MULTI-8-L0B | FW: x0043<br />
TRION3-1850-MULTI-4-D | FW: x0043<br />
TRION3-1850-MULTI-8-L0B | FW: x0043<br />
TRION3-1801-MULTI-8-L0B | FW: x0043<br />
TRION-1820-MULTI-4-D | FW: x0043</code></p>
<p><code>HW Support DEWE3 chassis | Firmware<br />
--------------------------------|-----------<br />
DEWE3-A4 | FW: x0038 MCU: 0x01000109<br />
DEWE3-M4 | FW: x0038 MCU: 0x01000109</code></p>
language
filenameDEWETRON TRION R6.7.3.zip
releasedate2024-02-14
nameDEWETRON TRION R6.7.3 Zip
id65cca43c-bf40-48d4-9140-4543d9c49a3c
active(true)
filesize213864836
versionR6.7.3
oscompatWindows
downloadtypeInstaller (archive)
advancedOnly(false)
internalOnly(false)
md5fe738bab54b1315ffb7ab5096e8003eb
sha120b5b28099df31e2febcc0dad0d897280d9d0100
DownloadsProduct(array)
product_id538f1c20-b708-43df-bdd1-3aedd9c49861
download_id65cca43c-bf40-48d4-9140-4543d9c49a3c
id65eace8e-431c-408e-b8d4-4b75d9c49a3c
57(array)
description<p><tt>## 2024-11-20 Release Notice DEWETRON TRION API R7.3.2<br />
Revision: f6f8bf5b1b38b78b8d8a67761130412adeb7e977<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.3.2.6198<br />
DEWETRON TRION API | 7.3.2.6198<br />
DEWETRON TRION driver | 7.3.2.6198<br />
DEWETRON DEWE2 driver | 7.3.2.6198<br />
## Files<br />
DEWETRON-TRION-Applications-7.3.2.6198.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.3.2 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes<br />
* Fix for semaphore handling of date and time changes.</tt><br />
</p>
description<p><code>## 2023-04-06 Release Notice DEWETRON TRION API R6.5.0</code></p>
<p><code>Revision: 945a6696167b443c4c32b869cbd3445a9d9ae37b</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.5.0.65368<br />
DEWETRON TRION API | 6.5.0.65368<br />
DEWETRON TRION driver | 6.5.0.65368<br />
DEWETRON DEWE2 driver | 6.5.0.65368</code></p>
<p><code>## Files<br />
DEWETRON-TRION-Applications-6.5.0.65368.exe</code></p>
<p><code>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.5 or higher<br />
* Windows 10 64-Bit or better</code></p>
<p><code>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</code></p>
<p><code>## New Features and most important bugfixes:<br />
* TRION3-1802-dLV: Full support added<br />
* TRION3-1600-dLV: Full support added<br />
* Chassis Controller 2:<br />
* Frequency-Out support<br />
* IRIG Out support</code></p>
<p><code>## Known Limitations<br />
* None</code></p>
<p> </p>
description<p><tt>## 2023-12-04 Release Notice DEWETRON TRION API R6.7.2</tt></p>
<p><tt>Revision: 6e29cade2bda4c122e6674a6263aeb6b6bb16c2c</tt></p>
<p><tt>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 6.7.2.2175<br />
DEWETRON TRION API | 6.7.2.2175<br />
DEWETRON TRION driver | 6.7.2.2175<br />
DEWETRON DEWE2 driver | 6.7.2.2175</tt></p>
<p><tt>## Files<br />
DEWETRON-TRION-Applications-6.7.2.2175.exe</tt></p>
<p><tt>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R6.7.1 or higher<br />
* Windows 10 64-Bit or better</tt></p>
<p><tt>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</tt></p>
<p><tt>## New Features and most important bugfixes<br />
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal<br />
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML<br />
* CHASSIS-CONTROLLER-V2: Fixed an issue with spikes when using CAN OUT (new fw)</tt></p>
<p><tt>## Known Limitations<br />
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected</tt></p>
<p><tt>## New Firmwares</tt></p>
<p><tt>HW Support DEWE3 chassis | Firmware<br />
--------------------------------|-----------<br />
DEWE3-A4 | FW: x0038 MCU: 0x01000109<br />
DEWE3-M4 | FW: x0038 MCU: 0x01000109</tt></p>
<p> </p>
description<p>+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<br />
2025-04-02 Release Notice dewetron_gmbh_lib_dewetron_drivers-0.0.0.23.zip</p>
<p>* Files:<br />
** dewetron_gmbh_lib_dewetron_drivers-0.0.0.23.zip</p>
<p>* Version: 0.0.0.23</p>
<p>* Requirements:<br />
** Windows 10 64-Bit or Windows 11 64-Bit<br />
** NI LabVIEW 2018 or higher (32 bit and 64 bit)<br />
** DEWETRON-TRION-Applications-7.4.2.7598 or higher</p>
<p>* Installation procedure<br />
** Can be installed by using LabVIEW Package Manager</p>
<p>* Description<br />
** Native LabVIEW driver for TRION & TRION3 modules<br />
** Documentation included in the source code<br />
** Dedicated functions included in separate VIs for hardware configuration<br />
** Programming examples for different use cases included<br />
** Supports TRION & TRION3 modules in DEWE2 (incl. TRIONet(3)) & DEWE3 chassis<br />
** Supports one or several NEX[DAQ] connected via USB or Ethernet<br />
** Synchronization via internal DEWE2/DEWE3 chassis clock<br />
** Synchronization of several DEWE2/DEWE3 (CC-V1 & CC-V2) chassis via TRION Sync I/O<br />
** Synchronization of several NEXD[DAQ] via PTP<br />
** Supported Channel types:<br />
*** Analog inputs (AI)<br />
*** Analog outputs (AO)<br />
*** Digital inputs (DI)<br />
*** Digital outputs (DO)<br />
*** Counter inputs (CNT)<br />
*** CAN message receive<br />
*** CAN message decode (for LabVIEW 32 bit)<br />
*** Recognition of MSIs & SUB modules</p>
<p>* Known Limitations<br />
** External Synchronization signals not supported<br />
** Maximum tested data rate: 200 MB/s (corresponds to 48 AI á 1 MS/s á 24 bit)<br />
** NEX[DAQ] limitation in daisy-chain wiring: 100 MB/s max. data rate<br />
** CAN-FD on NEX[DAQ]<br />
** CAN message decode (for LabVIEW 64 bit due to missing LabVIEW library)<br />
** CAN output</p>
<p>* Changes from v0.0.0.14 to v0.0.0.23<br />
** Support and synchronization of several NEX[DAQ] via PTP<br />
** Bugfixing for MSI support with NEX[DAQ] and TRION(3)-MULTI </p>
<p>* Changes from v0.0.0.13 to v0.0.0.14<br />
** Synchronization of several DEWE2/DEWE3 (CC-V1 & CC-V2) chassis via TRION Sync I/O added</p>
<p>* Changes from v0.0.0.8 to v0.0.0.13<br />
** New supported channel types:<br />
*** Analog outputs (AO)<br />
*** Digital outputs (DO)<br />
*** CAN message receive<br />
*** CAN message decode (for LabVIEW 32 bit)<br />
** TRIONet supported</p>
<p>* Changes from v0.0.0.7 to v0.0.0.8<br />
** If-1 is entered for ShuntResistance the Parameter won't be set<br />
** The number format has now also been set to a point as a decimal separator for the InputOffset<br />
** Only integer values can now be entered for ShuntResistance</p>
