## 2025-03-05 Release Notice DEWETRON TRIONet Firmware R7.4.2
Revision: 38d9842531ceafe409e38f55812f2da2aa53be1a
Components | Version
--------------------------------|--------------------------
OS | Yocto kirkstone-4.0.18
Controller | 4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
DEWETRON TRIONet Server | 7.4.2.7598
DEWETRON TRION API | 7.4.2.7598
DEWETRON TRION driver | 7.4.2.7598
## Files
### TRIONet remote update
trionet_swupdate_7.4.2.7598_455.swu
### TRIONet USB stick image
trionet_update_stick_image_7.4.2.7598_455.img.zip
## Fixes and Changes
* TRIONet API returned an invalid number of samples when using i64 getter function
## 2025-03-05 Release Notice DEWETRON TRIONet Firmware R7.4.2
Revision: 38d9842531ceafe409e38f55812f2da2aa53be1a
Components | Version
--------------------------------|--------------------------
OS | Yocto kirkstone-4.0.18
Controller | 4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
DEWETRON TRIONet Server | 7.4.2.7598
DEWETRON TRION API | 7.4.2.7598
DEWETRON TRION driver | 7.4.2.7598
## Files
### TRIONet remote update
trionet_swupdate_7.4.2.7598_455.swu
### TRIONet USB stick image
trionet_update_stick_image_7.4.2.7598_455.img.zip
## Fixes and Changes
* TRIONet API returned an invalid number of samples when using i64 getter function
* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release
* New Features and most important bugfixes:
- TRION-AO Digital-Out-channels are now labled "DO" in Oxygen channellist (Oxy + API)
- Dewetron Explorer: failed SRAM-Test during selftests now highlighted in red with correct text
- Increased reliablity when scanning for TEDS-devices on systems with high data-load
- TRION-CAN-channels default to "one-shot-mode". So messages that are not acknoledged by any listener will not be retried to be sent autonomously by the transceifer. This is done to decrease latency for CAN-Out and minimizing the risk of message-collisions on bus.
- Oversampling Configuration Item corrected
## Description:
TRIONet software release supporting TRIONet3 and TRIONet devices.
Please note that downgrades to older software versions are only possible by USB stick.
## New Features and most important bugfixes:
* TRIONet3 device support
* TRION(3)-1820-MULTI:
* Input coupling (highpass filter) overshoot fixed with 0.15Hz filter
* TRION(3)-Power:
* TRION SUB-XV support added
* TRION3-SUB-8:
* TRION SUB-XV support added
## Known Limitations
* None
TRIONet Firmware R6.7.1: Create new USB update stick
(01_TRIONet_R6.7.1_Create_USB-stick.zip - 228.22 MB) md5: d431e20767d01bc09fcfaa7d153c74ee
## Requirements
* All TRIONet devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes:
* Software Update: Fixed an issue when software update did not succeed
* IP Config: Set factory default IP address to DHCP with autoip (LL) fallback
* TRION driver fix for last 32bit addressable page (Debian Linux OS)
TRIONet Firmware R6.7.2: Create new USB update stick
(01_TRIONet_R6.7.2_Create_USB-stick.zip - 230.82 MB) md5: af3d153dab780a499d5e4149cbb92567
## Requirements
* All TRIONet devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes:
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML
## Known Limitations
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
TRIONet Firmware R7.0.0: Create new USB update stick
(01_TRIONet_R7.0.0_Create_USB-stick.zip - 234.46 MB) md5: 79d1ae896273f876ba841cc56115b9eb
## New Features and most important bugfixes:
* Allow device network configuration even if ip settings do not match
* Node default name is the serial number
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## 2025-03-05 Release Notice DEWETRON TRIONet Firmware R7.4.2
Revision: 38d9842531ceafe409e38f55812f2da2aa53be1a
Components | Version
--------------------------------|--------------------------
OS | Yocto kirkstone-4.0.18
Controller | 4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)
DEWETRON TRIONet Server | 7.4.2.7598
DEWETRON TRION API | 7.4.2.7598
DEWETRON TRION driver | 7.4.2.7598
## Files
### TRIONet remote update
trionet_swupdate_7.4.2.7598_455.swu
### TRIONet USB stick image
trionet_update_stick_image_7.4.2.7598_455.img.zip
## Fixes and Changes
* TRIONet API returned an invalid number of samples when using i64 getter function
TRIONet Firmware R7.5.1: Update files for existing USB stick
(02_TRIONet_R7.5.1_Update_existing_USB-stick.zip - 246.84 MB) md5: 99d6569f0216eef22e0e8400f7bcd2ae
* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release
* New Features and most important bugfixes:
- TRION-AO Digital-Out-channels are now labled "DO" in Oxygen channellist (Oxy + API)
- Dewetron Explorer: failed SRAM-Test during selftests now highlighted in red with correct text
- Increased reliablity when scanning for TEDS-devices on systems with high data-load
- TRION-CAN-channels default to "one-shot-mode". So messages that are not acknoledged by any listener will not be retried to be sent autonomously by the transceifer. This is done to decrease latency for CAN-Out and minimizing the risk of message-collisions on bus.
- Oversampling Configuration Item corrected
## Description:
TRIONet software release supporting TRIONet3 and TRIONet devices.
Please note that downgrades to older software versions are only possible by USB stick.
## New Features and most important bugfixes:
* TRIONet3 device support
* TRION(3)-1820-MULTI:
* Input coupling (highpass filter) overshoot fixed with 0.15Hz filter
* TRION(3)-Power:
* TRION SUB-XV support added
* TRION3-SUB-8:
* TRION SUB-XV support added
## Known Limitations
* None
TRIONet Firmware R6.7.1: Update files for existing USB stick
(02_TRIONet_R6.7.1_Update_existing_USB-stick.zip - 205.26 MB) md5: 3d6cef0939eb3b0681f0ce48d671c8c7
## Requirements
* All TRIONet devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes:
* Software Update: Fixed an issue when software update did not succeed
* IP Config: Set factory default IP address to DHCP with autoip (LL) fallback
* TRION driver fix for last 32bit addressable page (Debian Linux OS)
TRIONet Firmware R6.7.2: Update files for existing USB stick
(02_TRIONet_R6.7.2_Update_existing_USB-stick.zip - 207.86 MB) md5: 6837239c225e060b80a332179f69cb36
## Requirements
* All TRIONet devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes:
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML
## Known Limitations
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
TRIONet Firmware R6.7.3: Update files for existing USB stick
(02_TRIONet_R6.7.3_Update_existing_USB-stick.zip - 210.48 MB) md5: 1f1b31e3308b0217de0a918840226701
Version: R6.7.3 Releasedate: 2024-02-14
TRIONet Firmware R7.0.1: Update files for existing USB stick
(02_TRIONet_R7.0.1_Update_existing_USB-stick.zip - 211.51 MB) md5: e5f0e53f82912d3a48f542e48d749a2d
* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release
* New Features and most important bugfixes:
- TRION-AO Digital-Out-channels are now labled "DO" in Oxygen channellist (Oxy + API)
- Dewetron Explorer: failed SRAM-Test during selftests now highlighted in red with correct text
- Increased reliablity when scanning for TEDS-devices on systems with high data-load
- TRION-CAN-channels default to "one-shot-mode". So messages that are not acknoledged by any listener will not be retried to be sent autonomously by the transceifer. This is done to decrease latency for CAN-Out and minimizing the risk of message-collisions on bus.
- Oversampling Configuration Item corrected
## Description:
TRIONet software release supporting TRIONet3 and TRIONet devices.
Please note that downgrades to older software versions are only possible by USB stick.
## New Features and most important bugfixes:
* TRIONet3 device support
* TRION(3)-1820-MULTI:
* Input coupling (highpass filter) overshoot fixed with 0.15Hz filter
* TRION(3)-Power:
* TRION SUB-XV support added
* TRION3-SUB-8:
* TRION SUB-XV support added
## Requirements
* All TRIONet devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes:
* Software Update: Fixed an issue when software update did not succeed
* IP Config: Set factory default IP address to DHCP with autoip (LL) fallback
* TRION driver fix for last 32bit addressable page (Debian Linux OS)
## Requirements
* All TRIONet devices used with OXYGEN should be updated to the image included in this release
## New Features and most important bugfixes:
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML
## Known Limitations
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
## New Features and most important bugfixes:
* Allow device network configuration even if ip settings do not match
* Node default name is the serial number
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## New Features and most important bugfixes:
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
## New Features and most important bugfixes:
* Fix: ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected
* Fix: ID002 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal
* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release
* New Features and most important bugfixes:
** TRION-18XX-MULTI:
- Allow up to 60mA Excitation in Bridge Mode
** TRION-1802-dLV:
- Added encoder counter mode
** CB16
- MSI not correctly detected when EPADS are used
* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release
* New Features and most important bugfixes:
** TRION-18XX-MULTI:
- Allow up to 60mA Excitation in Bridge Mode
** TRION-1802-dLV:
- Added encoder counter mode
** CB16
- MSI not correctly detected when EPADS are used
* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release
* New Features and most important bugfixes:
** TRION-18XX-MULTI:
- Allow up to 60mA Excitation in Bridge Mode
** TRION-1802-dLV:
- Added encoder counter mode
** CB16
- MSI not correctly detected when EPADS are used
* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release
* New Features and most important bugfixes:
** Fixed: Sometimes TRION-X-CB-16-D was not found at startup
** Fixed: Stabilization of DEWETRON Explorer when using TRIONet
** Fixed: Support of TEDS Chaining for future usage in OXYGEN
** Fixed: Fix in calculation of SUB-CUR Delay Compensation
** Fixed: Fix of starting issue of multiple TRION-1820-POWER-4
* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release
* New Features and most important bugfixes:
** Fixed: Sometimes TRION-X-CB-16-D was not found at startup
** Fixed: Stabilization of DEWETRON Explorer when using TRIONet
** Fixed: Support of TEDS Chaining for future usage in OXYGEN
** Fixed: Fix in calculation of SUB-CUR Delay Compensation
** Fixed: Fix of starting issue of multiple TRION-1820-POWER-4
* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release
* New Features and most important bugfixes:
** Fixed: Sometimes TRION-X-CB-16-D was not found at startup
** Fixed: Stabilization of DEWETRON Explorer when using TRIONet
** Fixed: Support of TEDS Chaining for future usage in OXYGEN
** Fixed: Fix in calculation of SUB-CUR Delay Compensation
** Fixed: Fix of starting issue of multiple TRION-1820-POWER-4
* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release
* New Features and most important bugfixes:
** Fix an issue when not all TRION boards were shown in a DEWE3 chassis
** New firmware for TRION3-CONTROLLER: CHASSIS-CONTROLLER-V1
* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release
* New Features and most important bugfixes:
** Fix an issue when not all TRION boards were shown in a DEWE3 chassis
** New firmware for TRION3-CONTROLLER: CHASSIS-CONTROLLER-V1
* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release
* New Features and most important bugfixes:
** MSI2_V_600 support added
** Reduced update image size by 50%
** TRION-TIMING-V3
- Fixed off by 1 second sync issue (PTP)
* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release
* New Features and most important bugfixes:
** MSI2_V_600 support added
** Reduced update image size by 50%
** TRION-TIMING-V3
- Fixed off by 1 second sync issue (PTP)
* Requirements:
** All TRIONet devices used with OXYGEN must be updated to the image included in this release
* New Features and most important bugfixes:
** MSI2_V_600 support added
** Reduced update image size by 50%
** TRION-TIMING-V3
- Fixed off by 1 second sync issue (PTP)
## 2025-08-19 Release Notice DEWETRON TRION API R7.6.1
Revision: b4dfecd169bf9d2127e9b90217df4b0d26d77439
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.6.1.7502
DEWETRON TRION API | 7.6.1.7502
DEWETRON TRION driver | 7.6.1.7502
DEWETRON DEWE2 driver | 7.6.1.7502
## Files
DEWETRON-TRION-Applications-7.6.1.7502.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.6.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* TRION3-CONTROLLER: Fix for applying BCD time load value to register
* TRION3-CONTROLLER: Fix for auto setup with chassis controller (PTP)
* TRION3-CONTROLLER: Fix for analog input artefacts if dewe2 sync is connected
* LITEPA-CONTROLLER: Fix for applying BCD time load value to register
* LITEPA-CONTROLLER: Fix for analog input artefacts if dewe2 sync is connected
## 2025-08-19 Release Notice DEWETRON TRION API R7.6.1
Revision: b4dfecd169bf9d2127e9b90217df4b0d26d77439
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.6.1.7502
DEWETRON TRION API | 7.6.1.7502
DEWETRON TRION driver | 7.6.1.7502
DEWETRON DEWE2 driver | 7.6.1.7502
## Files
DEWETRON-TRION-Applications-7.6.1.7502.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.6.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* TRION3-CONTROLLER: Fix for applying BCD time load value to register
* TRION3-CONTROLLER: Fix for auto setup with chassis controller (PTP)
* TRION3-CONTROLLER: Fix for analog input artefacts if dewe2 sync is connected
* LITEPA-CONTROLLER: Fix for applying BCD time load value to register
* LITEPA-CONTROLLER: Fix for analog input artefacts if dewe2 sync is connected
## New Firmwares
HW Support Chassis modules | Firmware
--------------------------------|-----------
TRION3-CONTROLLER | FW: 0047 MCU: 01000137
HW Support LITE[PA] modules | Firmware
--------------------------------|-----------
LITEPA-CONTROLLER | FW: 0047
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.2.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* NEX[DAQ]-1000 simulation sample rate divider support fixed.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.2.0 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* NEX[DAQ]-1000 simulation sample rate divider support fixed.
## 2024-11-20 Release Notice DEWETRON TRION API R7.3.2
Revision: f6f8bf5b1b38b78b8d8a67761130412adeb7e977
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.3.2.6198
DEWETRON TRION API | 7.3.2.6198
DEWETRON TRION driver | 7.3.2.6198
DEWETRON DEWE2 driver | 7.3.2.6198
## Files
DEWETRON-TRION-Applications-7.3.2.6198.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.3.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* Fix for semaphore handling of date and time changes.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.4.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* New firmware for 18XX-MULTI fixing spikes in the signal when using CAN OUT
## 2025-03-05 Release Notice DEWETRON TRION API R7.4.2
Revision: 38d9842531ceafe409e38f55812f2da2aa53be1a
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.4.2.7598
DEWETRON TRION API | 7.4.2.7598
DEWETRON TRION driver | 7.4.2.7598
DEWETRON DEWE2 driver | 7.4.2.7598
## Files
DEWETRON-TRION-Applications-7.4.2.7598.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.4.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* TRIONet API returned an invalid number of samples when using i64 getter function
* Removed prototype boards listed in DEWETRON Explorer
## 2025-05-21 Release Notice DEWETRON TRION API R7.5.1
Revision: 3e3ed878907a6072cb10a8af2bf58122a90fab4b
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.5.1.8543
DEWETRON TRION API | 7.5.1.8543
DEWETRON TRION driver | 7.5.1.8543
DEWETRON DEWE2 driver | 7.5.1.8543
## Files
DEWETRON-TRION-Applications-7.5.1.8543.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.5.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* Fixed an justage error with TRION-2402-dACC board (internal)
## 2024-11-20 Release Notice DEWETRON TRION API R7.3.2
Revision: f6f8bf5b1b38b78b8d8a67761130412adeb7e977
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.3.2.6198
DEWETRON TRION API | 7.3.2.6198
DEWETRON TRION driver | 7.3.2.6198
DEWETRON DEWE2 driver | 7.3.2.6198
## Files
DEWETRON-TRION-Applications-7.3.2.6198.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.3.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes
* Fix for semaphore handling of date and time changes.
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.4.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* New firmware for 18XX-MULTI fixing spikes in the signal when using CAN OUT
## 2025-03-05 Release Notice DEWETRON TRION API R7.4.2
Revision: 38d9842531ceafe409e38f55812f2da2aa53be1a
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.4.2.7598
DEWETRON TRION API | 7.4.2.7598
DEWETRON TRION driver | 7.4.2.7598
DEWETRON DEWE2 driver | 7.4.2.7598
## Files
DEWETRON-TRION-Applications-7.4.2.7598.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.4.2 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* TRIONet API returned an invalid number of samples when using i64 getter function
* Removed prototype boards listed in DEWETRON Explorer
## 2025-05-21 Release Notice DEWETRON TRION API R7.5.1
Revision: 3e3ed878907a6072cb10a8af2bf58122a90fab4b
Components | Version
--------------------------------|--------------------------
DEWETRON Explorer | 7.5.1.8543
DEWETRON TRION API | 7.5.1.8543
DEWETRON TRION driver | 7.5.1.8543
DEWETRON DEWE2 driver | 7.5.1.8543
## Files
DEWETRON-TRION-Applications-7.5.1.8543.exe
## Requirements
* Update all TRION modules to the latest firmware included in this release
* Use OXYGEN R7.5.1 or higher
* Windows 10 64-Bit or better
## Installation procedure
* Install TRION applications
* Reboot system (if requested by the installer)
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)
* Power-cycle TRION boards (Power down system, then restart)
* Start DEWETRON Explorer and check for a successful firmware upgrade
## Fixes and Changes
* Fixed an justage error with TRION-2402-dACC board (internal)
* Requirements:
** Windows 10 64-Bit or Windows 11 64-Bit
** NI LabVIEW 2018 or higher (32 bit and 64 bit)
** DEWETRON-TRION-Applications-7.4.2.7598 or higher
* Installation procedure
** Can be installed by using LabVIEW Package Manager
* Description
** Native LabVIEW driver for TRION & TRION3 modules
** Documentation included in the source code
** Dedicated functions included in separate VIs for hardware configuration
** Programming examples for different use cases included
** Supports TRION & TRION3 modules in DEWE2 (incl. TRIONet(3)) & DEWE3 chassis
** Supports one or several NEX[DAQ] connected via USB or Ethernet
** Synchronization via internal DEWE2/DEWE3 chassis clock
** Synchronization of several DEWE2/DEWE3 (CC-V1 & CC-V2) chassis via TRION Sync I/O
** Synchronization of several NEXD[DAQ] via PTP
** Supported Channel types:
*** Analog inputs (AI)
*** Analog outputs (AO)
*** Digital inputs (DI)
*** Digital outputs (DO)
*** Counter inputs (CNT)
*** CAN message receive
*** CAN message decode (for LabVIEW 32 bit)
*** Recognition of MSIs & SUB modules
* Known Limitations
** External Synchronization signals not supported
** Maximum tested data rate: 200 MB/s (corresponds to 48 AI á 1 MS/s á 24 bit)
** NEX[DAQ] limitation in daisy-chain wiring: 100 MB/s max. data rate
** CAN-FD on NEX[DAQ]
** CAN message decode (for LabVIEW 64 bit due to missing LabVIEW library)
** CAN output
* Changes from v0.0.0.14 to v0.0.0.23
** Support and synchronization of several NEX[DAQ] via PTP
** Bugfixing for MSI support with NEX[DAQ] and TRION(3)-MULTI
* Changes from v0.0.0.13 to v0.0.0.14
** Synchronization of several DEWE2/DEWE3 (CC-V1 & CC-V2) chassis via TRION Sync I/O added
* Changes from v0.0.0.8 to v0.0.0.13
** New supported channel types:
*** Analog outputs (AO)
*** Digital outputs (DO)
*** CAN message receive
*** CAN message decode (for LabVIEW 32 bit)
** TRIONet supported
* Changes from v0.0.0.7 to v0.0.0.8
** If-1 is entered for ShuntResistance the Parameter won't be set
** The number format has now also been set to a point as a decimal separator for the InputOffset
** Only integer values can now be entered for ShuntResistance
SELECT COUNT(*) AS `count` FROM `dewe_cakeisalie`.`productgroups` AS `Productgroup` WHERE `Productgroup`.`id` = 'trionet-series'
1
1
0
SELECT `Productgroup`.`id`, `Productgroup`.`slug`, `Productgroup`.`sort`, `Productgroup`.`description`, `Productgroup`.`name`, `Productgroup`.`productline_id`, `Productgroup`.`active`, `Productgroup`.`permissions`, `Productline`.`name`, `Productline`.`slug`, `Productline`.`id` FROM `dewe_cakeisalie`.`productgroups` AS `Productgroup` LEFT JOIN `dewe_cakeisalie`.`productlines` AS `Productline` ON (`Productgroup`.`productline_id` = `Productline`.`id` AND `Productline`.`active` = '1' AND (`Productline`.`permissions` & 1 != 0)) WHERE `Productgroup`.`active` = '1' AND (`Productgroup`.`permissions` & 1 != 0) AND `Productgroup`.`slug` = 'trionet-series' ORDER BY `Productline`.`sort` ASC, `Productline`.`name` ASC LIMIT 1
1
1
0
SELECT `Product`.`name`, `Product`.`slug`, `Product`.`id`, `Product`.`description`, `Product`.`productgroup_id` FROM `dewe_cakeisalie`.`products` AS `Product` WHERE `Product`.`active` = '1' AND (`Product`.`permissions` & 1 != 0) AND `Product`.`productgroup_id` = ('60e81c05-3268-4c66-ab9d-2e5ed9c49a3c') ORDER BY `Product`.`sort` ASC, `Product`.`name` ASC
0
0
0
SELECT `Download`.`description`, `Download`.`advancedOnly`, `Download`.`internalOnly`, `Download`.`name`, `Download`.`id`, `Download`.`filesize`, `Download`.`version`, `Download`.`releasedate`, `Download`.`active`, `Download`.`downloadtype`, `Download`.`filename`, `Download`.`oscompat`, `Download`.`language`, `Download`.`md5`, `Download`.`sha1`, `Download`.`download_count`, `DownloadsProductgroup`.`id`, `DownloadsProductgroup`.`download_id`, `DownloadsProductgroup`.`productgroup_id` FROM `dewe_cakeisalie`.`downloads` AS `Download` JOIN `dewe_cakeisalie`.`downloads_productgroups` AS `DownloadsProductgroup` ON (`DownloadsProductgroup`.`productgroup_id` = '60e81c05-3268-4c66-ab9d-2e5ed9c49a3c' AND `DownloadsProductgroup`.`download_id` = `Download`.`id`) WHERE `Download`.`active` = '1' AND (`Download`.`permissions` & 1 != 0) ORDER BY `Download`.`downloadtype` ASC, `Download`.`sort` ASC, `Download`.`name` ASC
122
122
5
Query Explain:
Click an "Explain" link above, to see the query explanation.
description<p><code>## 2023-10-23 Release Notice DEWETRON TRIONet Firmware R6.7.1</code></p>
<p><code>Revision: 1ee33ea7162d4418af9de534a019b5426b815472</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
OS | Yocto kirkstone-4.0.11<br />
Controller | 4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)<br />
DEWETRON TRIONet Server | 6.7.1.1582<br />
DEWETRON TRION API | 6.7.1.1582<br />
DEWETRON TRION driver | 6.7.1.1582</code></p>
<p><code>## Files<br />
### TRIONet remote update<br />
trionet_swupdate_6.7.1.1582_298.swu<br />
### TRIONet USB stick image<br />
trionet_update_stick_image_6.7.1.1582_298.img.zip</code></p>
<p><code>## Requirements<br />
* All TRIONet devices used with OXYGEN should be updated to the image included in this release</code></p>
<p><code>## New Features and most important bugfixes:<br />
* Software Update: Fixed an issue when software update did not succeed<br />
* IP Config: Set factory default IP address to DHCP with autoip (LL) fallback<br />
* TRION driver fix for last 32bit addressable page (Debian Linux OS)</code></p>
<p> </p>
advancedOnly(false)
internalOnly(false)
nameTRIONet Firmware R6.7.1: Create new USB update stick
description<p><tt>## 2023-12-04 Release Notice DEWETRON TRIONet Firmware R6.7.2</tt></p>
<p><tt>Revision: 6e29cade2bda4c122e6674a6263aeb6b6bb16c2c</tt></p>
<p><tt>Components | Version<br />
--------------------------------|--------------------------<br />
OS | Yocto kirkstone-4.0.11<br />
Controller | 4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)<br />
DEWETRON TRIONet Server | 6.7.2.2175<br />
DEWETRON TRION API | 6.7.2.2175<br />
DEWETRON TRION driver | 6.7.2.2175</tt></p>
<p><tt>## Files<br />
### TRIONet remote update<br />
trionet_swupdate_6.7.2.2175_302.swu<br />
### TRIONet USB stick image<br />
trionet_update_stick_image_6.7.2.2175_302.img.zip</tt></p>
<p><tt>## Requirements<br />
* All TRIONet devices used with OXYGEN should be updated to the image included in this release</tt></p>
<p><tt>## New Features and most important bugfixes:<br />
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal<br />
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML</tt></p>
<p><tt>## Known Limitations<br />
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected</tt></p>
advancedOnly(false)
internalOnly(false)
nameTRIONet Firmware R6.7.2: Create new USB update stick
description<p><code>## 2023-10-23 Release Notice DEWETRON TRIONet Firmware R6.7.1</code></p>
<p><code>Revision: 1ee33ea7162d4418af9de534a019b5426b815472</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
OS | Yocto kirkstone-4.0.11<br />
Controller | 4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)<br />
DEWETRON TRIONet Server | 6.7.1.1582<br />
DEWETRON TRION API | 6.7.1.1582<br />
DEWETRON TRION driver | 6.7.1.1582</code></p>
<p><code>## Files<br />
### TRIONet remote update<br />
trionet_swupdate_6.7.1.1582_298.swu<br />
### TRIONet USB stick image<br />
trionet_update_stick_image_6.7.1.1582_298.img.zip</code></p>
<p><code>## Requirements<br />
* All TRIONet devices used with OXYGEN should be updated to the image included in this release</code></p>
<p><code>## New Features and most important bugfixes:<br />
* Software Update: Fixed an issue when software update did not succeed<br />
* IP Config: Set factory default IP address to DHCP with autoip (LL) fallback<br />
* TRION driver fix for last 32bit addressable page (Debian Linux OS)</code></p>
<p> </p>
advancedOnly(false)
internalOnly(false)
nameTRIONet Firmware R6.7.1: Update files for existing USB stick
description<p><tt>## 2023-12-04 Release Notice DEWETRON TRIONet Firmware R6.7.2</tt></p>
<p><tt>Revision: 6e29cade2bda4c122e6674a6263aeb6b6bb16c2c</tt></p>
<p><tt>Components | Version<br />
--------------------------------|--------------------------<br />
OS | Yocto kirkstone-4.0.11<br />
Controller | 4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)<br />
DEWETRON TRIONet Server | 6.7.2.2175<br />
DEWETRON TRION API | 6.7.2.2175<br />
DEWETRON TRION driver | 6.7.2.2175</tt></p>
<p><tt>## Files<br />
### TRIONet remote update<br />
trionet_swupdate_6.7.2.2175_302.swu<br />
### TRIONet USB stick image<br />
trionet_update_stick_image_6.7.2.2175_302.img.zip</tt></p>
<p><tt>## Requirements<br />
* All TRIONet devices used with OXYGEN should be updated to the image included in this release</tt></p>
<p><tt>## New Features and most important bugfixes:<br />
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal<br />
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML</tt></p>
<p><tt>## Known Limitations<br />
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected</tt></p>
advancedOnly(false)
internalOnly(false)
nameTRIONet Firmware R6.7.2: Update files for existing USB stick
description<p><code>## 2023-10-23 Release Notice DEWETRON TRIONet Firmware R6.7.1</code></p>
<p><code>Revision: 1ee33ea7162d4418af9de534a019b5426b815472</code></p>
<p><code>Components | Version<br />
--------------------------------|--------------------------<br />
OS | Yocto kirkstone-4.0.11<br />
Controller | 4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)<br />
DEWETRON TRIONet Server | 6.7.1.1582<br />
DEWETRON TRION API | 6.7.1.1582<br />
DEWETRON TRION driver | 6.7.1.1582</code></p>
<p><code>## Files<br />
### TRIONet remote update<br />
trionet_swupdate_6.7.1.1582_298.swu<br />
### TRIONet USB stick image<br />
trionet_update_stick_image_6.7.1.1582_298.img.zip</code></p>
<p><code>## Requirements<br />
* All TRIONet devices used with OXYGEN should be updated to the image included in this release</code></p>
<p><code>## New Features and most important bugfixes:<br />
* Software Update: Fixed an issue when software update did not succeed<br />
* IP Config: Set factory default IP address to DHCP with autoip (LL) fallback<br />
* TRION driver fix for last 32bit addressable page (Debian Linux OS)</code></p>
<p> </p>
description<p><tt>## 2023-12-04 Release Notice DEWETRON TRIONet Firmware R6.7.2</tt></p>
<p><tt>Revision: 6e29cade2bda4c122e6674a6263aeb6b6bb16c2c</tt></p>
<p><tt>Components | Version<br />
--------------------------------|--------------------------<br />
OS | Yocto kirkstone-4.0.11<br />
Controller | 4.1.7 (500932eed5a6e2ba78ec0bbd2d3caf1783148de0)<br />
DEWETRON TRIONet Server | 6.7.2.2175<br />
DEWETRON TRION API | 6.7.2.2175<br />
DEWETRON TRION driver | 6.7.2.2175</tt></p>
<p><tt>## Files<br />
### TRIONet remote update<br />
trionet_swupdate_6.7.2.2175_302.swu<br />
### TRIONet USB stick image<br />
trionet_update_stick_image_6.7.2.2175_302.img.zip</tt></p>
<p><tt>## Requirements<br />
* All TRIONet devices used with OXYGEN should be updated to the image included in this release</tt></p>
<p><tt>## New Features and most important bugfixes:<br />
* TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) is distorting the input signal<br />
* trion_cal: TRION-18XX-MULTI, allow AUTO and 0Hz for HP-Filter in XML</tt></p>
<p><tt>## Known Limitations<br />
* ID001 - TRION(3)-18xx-MULTI Highpass Filters (0.16Hz - 100Hz) show 64% overshoot and higher cutoff frequencies than expected</tt></p>
description<p><code>## 2025-08-19 Release Notice DEWETRON TRION API R7.6.1<br />
Revision: b4dfecd169bf9d2127e9b90217df4b0d26d77439<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.6.1.7502<br />
DEWETRON TRION API | 7.6.1.7502<br />
DEWETRON TRION driver | 7.6.1.7502<br />
DEWETRON DEWE2 driver | 7.6.1.7502<br />
## Files<br />
DEWETRON-TRION-Applications-7.6.1.7502.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.6.1 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes and Changes<br />
* TRION3-CONTROLLER: Fix for applying BCD time load value to register<br />
* TRION3-CONTROLLER: Fix for auto setup with chassis controller (PTP)<br />
* TRION3-CONTROLLER: Fix for analog input artefacts if dewe2 sync is connected<br />
* LITEPA-CONTROLLER: Fix for applying BCD time load value to register<br />
* LITEPA-CONTROLLER: Fix for analog input artefacts if dewe2 sync is connected</code><br />
</p>
description<p><br />
<code>## 2025-08-19 Release Notice DEWETRON TRION API R7.6.1<br />
Revision: b4dfecd169bf9d2127e9b90217df4b0d26d77439<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.6.1.7502<br />
DEWETRON TRION API | 7.6.1.7502<br />
DEWETRON TRION driver | 7.6.1.7502<br />
DEWETRON DEWE2 driver | 7.6.1.7502<br />
## Files<br />
DEWETRON-TRION-Applications-7.6.1.7502.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.6.1 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes and Changes<br />
* TRION3-CONTROLLER: Fix for applying BCD time load value to register<br />
* TRION3-CONTROLLER: Fix for auto setup with chassis controller (PTP)<br />
* TRION3-CONTROLLER: Fix for analog input artefacts if dewe2 sync is connected<br />
* LITEPA-CONTROLLER: Fix for applying BCD time load value to register<br />
* LITEPA-CONTROLLER: Fix for analog input artefacts if dewe2 sync is connected<br />
## New Firmwares<br />
HW Support Chassis modules | Firmware<br />
--------------------------------|-----------<br />
TRION3-CONTROLLER | FW: 0047 MCU: 01000137<br />
HW Support LITE[PA] modules | Firmware<br />
--------------------------------|-----------<br />
LITEPA-CONTROLLER | FW: 0047</code><br />
</p>
description<p><tt>## 2024-08-27 Release Notice DEWETRON TRION API R7.2.1</tt></p>
<p><tt>Revision: 876a648bcaebd47fe225e89ab132256fce382190</tt></p>
<p><tt>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.2.1.5243<br />
DEWETRON TRION API | 7.2.1.5243<br />
DEWETRON TRION driver | 7.2.1.5243<br />
DEWETRON DEWE2 driver | 7.2.1.5243</tt></p>
<p><tt>## Files<br />
DEWETRON-TRION-Applications-7.2.1.5243.exe</tt></p>
<p><tt>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.2.0 or higher<br />
* Windows 10 64-Bit or better</tt></p>
<p><tt>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</tt></p>
<p><tt>## Fixes<br />
* NEX[DAQ]-1000 simulation sample rate divider support fixed.</tt></p>
description<p><tt>## 2024-08-27 Release Notice DEWETRON TRION API R7.2.1</tt></p>
<p><tt>Revision: 876a648bcaebd47fe225e89ab132256fce382190</tt></p>
<p><tt>Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.2.1.5243<br />
DEWETRON TRION API | 7.2.1.5243<br />
DEWETRON TRION driver | 7.2.1.5243<br />
DEWETRON DEWE2 driver | 7.2.1.5243</tt></p>
<p><tt>## Files<br />
DEWETRON-TRION-Applications-7.2.1.5243.exe</tt></p>
<p><tt>## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.2.0 or higher<br />
* Windows 10 64-Bit or better</tt></p>
<p><tt>## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade</tt></p>
<p><tt>## Fixes<br />
* NEX[DAQ]-1000 simulation sample rate divider support fixed.</tt></p>
description<p><tt>## 2024-11-20 Release Notice DEWETRON TRION API R7.3.2<br />
Revision: f6f8bf5b1b38b78b8d8a67761130412adeb7e977<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.3.2.6198<br />
DEWETRON TRION API | 7.3.2.6198<br />
DEWETRON TRION driver | 7.3.2.6198<br />
DEWETRON DEWE2 driver | 7.3.2.6198<br />
## Files<br />
DEWETRON-TRION-Applications-7.3.2.6198.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.3.2 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes<br />
* Fix for semaphore handling of date and time changes.</tt></p>
description<p><tt>## 2025-03-05 Release Notice DEWETRON TRION API R7.4.2<br />
Revision: 38d9842531ceafe409e38f55812f2da2aa53be1a<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.4.2.7598<br />
DEWETRON TRION API | 7.4.2.7598<br />
DEWETRON TRION driver | 7.4.2.7598<br />
DEWETRON DEWE2 driver | 7.4.2.7598<br />
## Files<br />
DEWETRON-TRION-Applications-7.4.2.7598.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.4.2 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes and Changes<br />
* TRIONet API returned an invalid number of samples when using i64 getter function<br />
* Removed prototype boards listed in DEWETRON Explorer</tt><br />
<br />
</p>
description<p><br />
<code>## 2025-05-21 Release Notice DEWETRON TRION API R7.5.1<br />
Revision: 3e3ed878907a6072cb10a8af2bf58122a90fab4b<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.5.1.8543<br />
DEWETRON TRION API | 7.5.1.8543<br />
DEWETRON TRION driver | 7.5.1.8543<br />
DEWETRON DEWE2 driver | 7.5.1.8543<br />
## Files<br />
DEWETRON-TRION-Applications-7.5.1.8543.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.5.1 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes and Changes<br />
* Fixed an justage error with TRION-2402-dACC board (internal)</code></p>
description<p><tt>## 2024-11-20 Release Notice DEWETRON TRION API R7.3.2<br />
Revision: f6f8bf5b1b38b78b8d8a67761130412adeb7e977<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.3.2.6198<br />
DEWETRON TRION API | 7.3.2.6198<br />
DEWETRON TRION driver | 7.3.2.6198<br />
DEWETRON DEWE2 driver | 7.3.2.6198<br />
## Files<br />
DEWETRON-TRION-Applications-7.3.2.6198.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.3.2 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes<br />
* Fix for semaphore handling of date and time changes.</tt><br />
</p>
description<p><tt>## 2025-03-05 Release Notice DEWETRON TRION API R7.4.2<br />
Revision: 38d9842531ceafe409e38f55812f2da2aa53be1a<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.4.2.7598<br />
DEWETRON TRION API | 7.4.2.7598<br />
DEWETRON TRION driver | 7.4.2.7598<br />
DEWETRON DEWE2 driver | 7.4.2.7598<br />
## Files<br />
DEWETRON-TRION-Applications-7.4.2.7598.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.4.2 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes and Changes<br />
* TRIONet API returned an invalid number of samples when using i64 getter function<br />
* Removed prototype boards listed in DEWETRON Explorer</tt><br />
<br />
</p>
description<p><br />
<code>## 2025-05-21 Release Notice DEWETRON TRION API R7.5.1<br />
Revision: 3e3ed878907a6072cb10a8af2bf58122a90fab4b<br />
Components | Version<br />
--------------------------------|--------------------------<br />
DEWETRON Explorer | 7.5.1.8543<br />
DEWETRON TRION API | 7.5.1.8543<br />
DEWETRON TRION driver | 7.5.1.8543<br />
DEWETRON DEWE2 driver | 7.5.1.8543<br />
## Files<br />
DEWETRON-TRION-Applications-7.5.1.8543.exe<br />
## Requirements<br />
* Update all TRION modules to the latest firmware included in this release<br />
* Use OXYGEN R7.5.1 or higher<br />
* Windows 10 64-Bit or better<br />
## Installation procedure<br />
* Install TRION applications<br />
* Reboot system (if requested by the installer)<br />
* Start DEWETRON Explorer and update each TRION board firmware to latest version (right-click on enclosure name)<br />
* Power-cycle TRION boards (Power down system, then restart)<br />
* Start DEWETRON Explorer and check for a successful firmware upgrade<br />
## Fixes and Changes<br />
* Fixed an justage error with TRION-2402-dACC board (internal)</code></p>
description<p>+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<br />
2025-04-02 Release Notice dewetron_gmbh_lib_dewetron_drivers-0.0.0.23.zip</p>
<p>* Files:<br />
** dewetron_gmbh_lib_dewetron_drivers-0.0.0.23.zip</p>
<p>* Version: 0.0.0.23</p>
<p>* Requirements:<br />
** Windows 10 64-Bit or Windows 11 64-Bit<br />
** NI LabVIEW 2018 or higher (32 bit and 64 bit)<br />
** DEWETRON-TRION-Applications-7.4.2.7598 or higher</p>
<p>* Installation procedure<br />
** Can be installed by using LabVIEW Package Manager</p>
<p>* Description<br />
** Native LabVIEW driver for TRION & TRION3 modules<br />
** Documentation included in the source code<br />
** Dedicated functions included in separate VIs for hardware configuration<br />
** Programming examples for different use cases included<br />
** Supports TRION & TRION3 modules in DEWE2 (incl. TRIONet(3)) & DEWE3 chassis<br />
** Supports one or several NEX[DAQ] connected via USB or Ethernet<br />
** Synchronization via internal DEWE2/DEWE3 chassis clock<br />
** Synchronization of several DEWE2/DEWE3 (CC-V1 & CC-V2) chassis via TRION Sync I/O<br />
** Synchronization of several NEXD[DAQ] via PTP<br />
** Supported Channel types:<br />
*** Analog inputs (AI)<br />
*** Analog outputs (AO)<br />
*** Digital inputs (DI)<br />
*** Digital outputs (DO)<br />
*** Counter inputs (CNT)<br />
*** CAN message receive<br />
*** CAN message decode (for LabVIEW 32 bit)<br />
*** Recognition of MSIs & SUB modules</p>
<p>* Known Limitations<br />
** External Synchronization signals not supported<br />
** Maximum tested data rate: 200 MB/s (corresponds to 48 AI á 1 MS/s á 24 bit)<br />
** NEX[DAQ] limitation in daisy-chain wiring: 100 MB/s max. data rate<br />
** CAN-FD on NEX[DAQ]<br />
** CAN message decode (for LabVIEW 64 bit due to missing LabVIEW library)<br />
** CAN output</p>
<p>* Changes from v0.0.0.14 to v0.0.0.23<br />
** Support and synchronization of several NEX[DAQ] via PTP<br />
** Bugfixing for MSI support with NEX[DAQ] and TRION(3)-MULTI </p>
<p>* Changes from v0.0.0.13 to v0.0.0.14<br />
** Synchronization of several DEWE2/DEWE3 (CC-V1 & CC-V2) chassis via TRION Sync I/O added</p>
<p>* Changes from v0.0.0.8 to v0.0.0.13<br />
** New supported channel types:<br />
*** Analog outputs (AO)<br />
*** Digital outputs (DO)<br />
*** CAN message receive<br />
*** CAN message decode (for LabVIEW 32 bit)<br />
** TRIONet supported</p>
<p>* Changes from v0.0.0.7 to v0.0.0.8<br />
** If-1 is entered for ShuntResistance the Parameter won't be set<br />
** The number format has now also been set to a point as a decimal separator for the InputOffset<br />
** Only integer values can now be entered for ShuntResistance</p>
